The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


Back to Member

Go to Thread

Member Picture

R22RumRunner at aol.com



Loading boat on trailer

2009-11-17; 19:29:26 EST

Member Since

2002-09-17

Posts: 4946

Art,
Triad was not the only manufacturer for General Boats. Many, including mine 
 were made by Trailmaster. Same Rhodes bunk configuration.
 
Rummy
 
 
In a message dated 11/17/2009 6:09:27 P.M. Eastern Standard Time,  
czerwonky at earthlink.net writes:

OK,  Rob.  

Sorry, I did not recognize the boat name and speculated  that the trailer 
was a non-Triad.  Centering my former O'Day 222 onto its  trailer correctly, 
even with the keel guides in use, was always a monumental  headache.  I 
would make some simple suggestions for those non-Triad  units.  

SOP in loading the R22 onto a Triad is CB down.  The  trailer can be too 
deep on the ramp, ergo keel perched on a keel side  rail?  I usually pull the 
trailer out slowly enough to see if the boat  begins to heel when coming up 
the ramp, backing off and recentering if it  does.  My side rails (a custom 
non-Triad, generous space separating the  side rails) have not had this 
problem with CB  down.

Art

See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting