I'm not familiar with Delrin. I have always used UHMWPE which is UV  
stabilized and is self lubricating.
 
Rummy
 
 
In a message dated 4/13/2011 3:39:30 P.M. Eastern Daylight Time,  
cgeisser12345 at gmail.com writes:

(Rummy)  probably delrin for the slider, it's dimensionally stable and I 
have
some  that will probably work.
I didn't know if the old system used a type of  clip, or a slider. there is
no hardware at all on mine. I was thinking  either a delrin slider or a
stainless block on the cabin roof, and another  on the mast, a stainless
tounge clip would clip into both, making the top  go all up, or all down. Is
yours adjustable to like halfway? or is it all  up or down as well?

( Rob) just looking for pictures for however the  pop top attaches to the
mast, and/ or the cabin roof. Also is it riveted to  the top, or bolted?

>
>
> Today's  Topics:
>
>   1. Re: Cabin floor warp (Caesar  Paul)
>   2. Re: Cabin floor warp (Lowe,  Rob)
>   3. Re: Cabin floor warp  (R22RumRunner at aol.com)
>   4. Trailering Checklist? (Joe  Camp)
>   5. Re: Cabin floor warp  (KenBates)
>   6. Re: Trailering Checklist?  (R22RumRunner at aol.com)
>   7. Re: Cabin floor warp  (R22RumRunner at aol.com)
>   8. Re: Pop top hardware (carl  geisser)
>   9. Re: Pop top hardware (Lowe, Rob)
>   10. Re: Pop top hardware (R22RumRunner at aol.com)
>  11.  ///////Getting ready for launch//// A couple of questions  (lkgore)
>
>
>
> Message: 8
> Date: Wed, 13 Apr  2011 05:37:32 -0600
> From: carl geisser  <cgeisser12345 at gmail.com>
> Subject: Re: [Rhodes22-list] Pop top  hardware
> To: rhodes22-list at rhodes22.org
> Message-ID:  <BANLkTinQ22sQvVsJPOT0-=31Y=sg5Le3wQ at mail.gmail.com>
>  Content-Type: text/plain; charset=ISO-8859-1
>
> I am making  hardware for an old pop top (I work at a machine shop, so 
this
> is much  easier)
> and was wondering if anyone has or can take some pictures of  an older
> system. I have some ideas, but would like to see how it used  to be done. 
I
> have seen pics of the new system with the roller furling  mast, but none
> with
> the older system.
>
>  Carl
>
>
> ------------------------------
>
>  Message: 9
> Date: Wed, 13 Apr 2011 09:05:19 -0400
> From: "Lowe,  Rob" <rlowe at vt.edu>
> Subject: Re: [Rhodes22-list] Pop top  hardware
> To: The Rhodes 22 Email List  <rhodes22-list at rhodes22.org>
> Message-ID:
>      <20DE79EA3783484A94EF626CFBEB95B32367C83254 at rivendell.cc.w2k.vt.edu
>  >
> Content-Type: text/plain; charset="us-ascii"
>
>  Carl,
> My boat is on the hard, don't know if I can get any decent shots  for a
> while.  But I have the standard main with pop top, 1976  vintage.  What
> exactly are you looking for?  -  rob
>
>
>
> -----Original Message-----
> From:  rhodes22-list-bounces at rhodes22.org [mailto:
>  rhodes22-list-bounces at rhodes22.org] On Behalf Of carl geisser
> Sent:  Wednesday, April 13, 2011 7:38 AM
> To:  rhodes22-list at rhodes22.org
> Subject: Re: [Rhodes22-list] Pop top  hardware
>
> I am making hardware for an old pop top (I work at a  machine shop, so 
this
> is much easier)
> and was wondering if  anyone has or can take some pictures of an older
> system. I have some  ideas, but would like to see how it used to be done. 
I
> have seen pics  of the new system with the roller furling mast, but none
> with
>  the older system.
>
> Carl
>  ______________________________
> ____________________
> To  subscribe/unsubscribe go to
>  http://www.rhodes22.org/mailman/listinfo/rhodes22-list
>
> For the  list Charter and help with using the mailing list and archives go
> to  http://www.rhodes22.org/list
>  __________________________________________________
>
>
>
>  ------------------------------
>
> Message: 10
> Date: Wed,  13 Apr 2011 10:34:20 -0400 (EDT)
> From: R22RumRunner at aol.com
>  Subject: Re: [Rhodes22-list] Pop top hardware
> To:  rhodes22-list at rhodes22.org
> Message-ID:  <9afea.27d0070f.3ad70e6c at aol.com>
> Content-Type: text/plain;  charset="US-ASCII"
>
> Carl,
> What material are you going  to use to make the slider????
>
> Rummy
>
>
> In  a message dated 4/13/2011 7:37:58 A.M. Eastern Daylight Time,
>  cgeisser12345 at gmail.com writes:
>
> I am  making hardware for  an old pop top (I work at a machine shop, so 
this
> is  much  easier)
> and was wondering if anyone has or can take some pictures  of  an older
> system. I have some ideas, but would like to see how  it used to be  
done. I
> have seen pics of the new system with the  roller furling mast, but  none
> with
> the older   system.
>
> Carl
>  __________________________________________________
> To   subscribe/unsubscribe go to
>  http://www.rhodes22.org/mailman/listinfo/rhodes22-list
>
> For the  list  Charter and help with using the mailing list and archives  
go
> to  http://www.rhodes22.org/list
>  __________________________________________________
>
>
>
>
__________________________________________________
To  subscribe/unsubscribe go to  
http://www.rhodes22.org/mailman/listinfo/rhodes22-list

For the list  Charter and help with using the mailing list and archives go 
to  http://www.rhodes22.org/list
__________________________________________________