The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


Back to Member

Go to Thread

Member Picture

R22RumRunner at aol.com



Rudder attachment

2013-03-11; 16:14:31 EDT

Member Since

2002-09-17

Posts: 4946

Rob,
Just my 2 cents worth. It's the combination of the Rudder and the mounts  
that give the R22 a neutral helm. If the rudder can't extend all the way 
under  the hull as designed, you will have a less than desirable helm.
 
Rummy 
 
 
In a message dated 3/11/2013 3:19:47 P.M. Eastern Daylight Time,  
blue66corvette at hotmail.com writes:


Mary  Lou is right...this is not original....the original on both of my 
boats (84  and 98) are pins about 1/4 diameter that are attached to rudder. The 
top one  is shorter and slides through both flanges but no attachment. The 
bottom one  is longer (thus allowing to set bottom pin in before aligning 
top pin. Bottom  pin has a side spring catch (I don't know what else to call 
it) that needs to  be lifted to allow removing rudder. This will allow rudder 
to come off in an  emergency before the transom is ripped off (my theory, 
one would need to ask  Stan)

I can take some pictures to post (I think I can see this with the  boat in 
the water) but it will take a few days before I can get to the  boat.

Charles
998 R 22
sv Day Dream


See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting