Graham,
My guess is that Stanley is already working on it. :)
Rummy
In a message dated 6/24/2013 5:53:41 P.M. Eastern Daylight Time,
gstewart8 at cogeco.ca writes:
Rummy:
Thanks for the idea. I looked up the Hobi mast step online and it is a
pretty specialized bit of equipment. I think I will let some other more
experienced fool try this first.
Graham
-----Original Message-----
From: rhodes22-list-bounces at rhodes22.org
[mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of
R22RumRunner at aol.com
Sent: June-24-13 5:02 PM
To: rhodes22-list at rhodes22.org
Subject: Re: [Rhodes22-list] One or Three
Graham,
I had a Hobie 16 which had a single point mast mount which pivoted. Perhaps
their parts would work for the Rhodes.
Rummy
In a message dated 6/24/2013 1:48:28 P.M. Eastern Daylight Time,
gstewart8 at cogeco.ca writes:
I have rebuilt my mast step to remove cracks in the gel coat and to
ensure
the core was solid. I am interested in using the single screw when the
bracket is reinstalled so that the mast can pivot slightly. It sounds like
an interesting idea but I think I would need to work into the install a
smooth surface under the bracket that would protect the gel coat and allow
for rotation. If anyone has seen such an installation I would appreciate
knowing about it.
BTW, I had my mast fall while raising it and like others have mentioned
it
was just as good that the sep was not through bolted. I broke a fitting on
the boom, which I can work around, bent the step bracket , which I was
able
to straighten myself and had the deck step to repair but fortunately the
mast was ok.
I have been the master of every major disaster on my boat. In this case I
was so anxious to get the mast up I didn't check to make sure the ties
holding the mast in place were fastened and it wasn't until the mast was
almost vertical that it decided to make its move. Some might think that
was
an entirely preventable mistake, and while that theory as its merits, I
prefer to think that with one of the oldest Rhodes in the fleet, I just
have more experience. In this business it is hard to distinguish between
really stupid mistakes and experience so I will go with the latter.
Graham
-----Original Message-----
From: rhodes22-list-bounces at rhodes22.org
[mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of Michael Hellyar
Sent: June-23-13 10:54 AM
To: The Rhodes 22 Email List
Cc: Steve Congdon
Subject: Re: [Rhodes22-list] One or Three
Stan
The single screw was your earlier email explanation. I thought it was
yours.
The fitting we acquired from WEST Marine for the 22 I am rehabbing has
three holes. We did not check my partner's 22 until after you explained
the
single screw hinge and pivot system. He said his mast step is screwed down
by one pretty hefty screw. His is 78 or 79. Now we are thoroughly
confused. I'm sure we will hear from the gang pretty quick.
Mike Hellyar
sent from my iPad
On Jun 23, 2013, at 9:11 AM, Stan Spitzer <stan at rhodes22.com> wrote:
> OOPS,
>> the mast steps at the plant are put on with/three/ # 12 X 1" sheet
> metal screws, not one. you might be on to something with your idea
> of using just one so the mast step can pivot into the wind.
>> ss
>>> On 6/22/13 10:54 AM, Michael Hellyar wrote:
>> I feel privileged to be in receipt of a message from the Oracle of
Rhodes. ; - ) as well as the elders of Rhodes like Rummy. I cannot argue
with your immovable object argument. Something has to give. Through
bolting
and reinforcing the surrounding area of the cabin top, as we have done,
might raise the threshold level for dismasting. Your point is that at some
level of (leverage) force through bolting can result in costly damage to
the structure. We agree. You also point out that the pivoting hinge would
allow the mast to come down in any direction without becoming disconnected
from the cabin top or disconnecting with little damage. That's a really
good point. By the way, pivoting and single screw attachment is news and I
don't think anyone mentioned that detail. Our fixture has three screw/bolt
holes.
>>>> __________________________________________________
> To subscribe/unsubscribe go to
>http://www.rhodes22.org/mailman/listinfo/rhodes22-list>> For the list Charter and help with using the mailing list and
> archives go to http://www.rhodes22.org/list> __________________________________________________
__________________________________________________
To subscribe/unsubscribe go to
http://www.rhodes22.org/mailman/listinfo/rhodes22-list
For the list Charter and help with using the mailing list and archives go
to http://www.rhodes22.org/list
__________________________________________________
__________________________________________________
To subscribe/unsubscribe go to
http://www.rhodes22.org/mailman/listinfo/rhodes22-list
For the list Charter and help with using the mailing list and archives go
to http://www.rhodes22.org/list
__________________________________________________
__________________________________________________
To subscribe/unsubscribe go to
http://www.rhodes22.org/mailman/listinfo/rhodes22-list
For the list Charter and help with using the mailing list and archives go
to
http://www.rhodes22.org/list
__________________________________________________
__________________________________________________
To subscribe/unsubscribe go to
http://www.rhodes22.org/mailman/listinfo/rhodes22-list
For the list Charter and help with using the mailing list and archives go
to http://www.rhodes22.org/list
__________________________________________________
×
Message to Webmaster:
To use your email application to send a messsage to the webmaster rather than this form,
.
