Good idea Mary,

Here are the two that I had. I think it's obvious which is the older. "Respite" is a 1989 that Stan Re-cycled in 2005.  I don't know if the older outhaul car was an '89 or not. It is a PDF. file and uses specs from Dwyer Aluminum Mast Co. Roger Pihlaja posted some specs on The List years back. There are some discrepancies from these which could reflect a difference in things like forestays vs. different models of Jib furler. Roger has/had a Harken furler, where as "Respite" has a CDI 2, but dimensions for shrouds, tangs and spreader fittings are helpful to have.

Hope this helps.

Joe Dempsey
Trojan 42
m/v Voyager
Ex-Rhodes 22
s/v Respite
Deltaville, VA




Rhodes Outhaul - Copy.jpg

New Rhodes Outhaul Car.jpg

Rhodes Rigging.pdf

________________________________
From: Rhodes22-list <rhodes22-list-bounces at rhodes22.org> on behalf of Mary Lou Troy <mtroy at atlanticbb.net>
Sent: Wednesday, May 24, 2023 9:48 AM
To: recorderguy2001 at yahoo.com <recorderguy2001 at yahoo.com>; The Rhodes 22 Email List <rhodes22-list at rhodes22.org>
Subject: Re: [Rhodes22-list] Outhaul car and thanks

Hi Peter,
You probably ought to send a photo. There have been more changes to this
part over the years than practically any other part.

Actually, I'd encourage everyone to reply to this thread with a picture
of their outhaul cars. If they included the age of the boat and if they
replaced what they had with something different and why, we could build
quite an archive around this thread.

Mary Lou
ex Rhodes 22
now Rosborough RF-246  Tara
Rock Hall, MD

On 5/24/2023 8:44 AM, Peter via Rhodes22-list wrote:
> Hi All,
>      I  took my 1st sail on Sunday and a more perfect afternoon for a shakedown is hard to imagine.  Sunny with steady (for lake Arthur) breezes around 10-12 knts.
>      Thanks to all of you who've answered my posts and helped me get underway this season,  your input has been invaluable.
>      In the course of setting up my running rigging I discovered that the outhaul car on the boom has a chunk missing and should be replaced.   Does anyone have a source for this part?
>
> Thanks yet again
>     Peter