My surge brakes have an electrical disconnect for backing up. It's wired to the backup lights on my vehicle.

Mark

On Sun, Jul 23, 2023, 7:41 AM Olivier Hecht <oehecht at gmail.com> wrote:

> There should be a small pin that goes in a hole across the tongue to
> prevent the sliding action that activates the brakes when you need to back
> up. If you don’t have that pin, you can look for the hole that should be
> there and get the correct sized pin for it. You still have to insert it
> each time you need to back up, but it’s easier and better than
> disconnecting the line.
>
> On Sun, Jul 23, 2023 at 7:23 AM Scott Andrews via Rhodes22-list <
> rhodes22-list at rhodes22.org> wrote:
>
> > I am unable to back up without disconnecting the brake line quick
> > disconnect.
> >
> > Sent from my iPhone
> >
> > > On Jul 22, 2023, at 4:17 PM, Ric Stott <ric at stottarchitecture.com>
> > wrote:
> > >
> > > Umm - What?
> > >
> > > Sent from my iPhone
> > >
> > >> On Jul 22, 2023, at 5:18 PM, Jeff Smith Photo <
> jeffsmithphoto at gmail.com>
> > wrote:
> > >>
> > >> Has any one had air introduced in the brake lined by decoupling to
> > extend
> > >> the tongue?
> > >>
> > >> Best Regards
> > >> Jeff Smith
> > >> www.http://JeffSmithPhoto.Net
> > >> 732-236-1368
> >
> >
>