Tom,

The railing is mostly one piece of tubing with some bends.  Unfortunately, the kink I added is about in the middle of one of the bends. It's on the left side in the full picture.

I looked through our 'Picture Gallery' for a photo of this style railing installed on a boat, and this is the best I found: http://www.rhodes22.org/pics/lloyd_large.jpg

When I added my solar 'arch' to the boat, I reused the existing hardware that's used to attach the railing to the boat.  So, I can't make that hardware available to you.  These are not complicated pieces, but they are non-standard, so it's likely you would have to have replacements fabricated.  My boat and trailer are still at the trailer repairs shop in Maine.  The trailer is supposed to be ready to go this week.  When that happens, I'll also take some pictures of the railing mounting hardware.

--Peter


Stern Railing 1.jpeg

Stern Railing 2.jpeg

> On 2023-09-04, at 16:10:30 EDT, Tom Hyatt wrote:
>
> Peter:
> 
> That would be wonderful. If you could send me a picture of the railing and also 
> take a picture of where the bent section is. If it's on a straight section and 
> the fittings are connected with Allen screws, perhaps I could just replace it. 
> 
> And, by the way, I've been watching your Youtube video now for a few months. The 
> work you've done and your journeys are very inspiring. 
> 
> Thanks,
> 
> Tom Hyatt
> 
>