Sorry to hear that Rodger,  It really only needs the two 4" welds and some wrench turning to add to any existing lift frame. It's really a nice setup.

Considering any offers, else I'm going to fashion a shed frame with the parts.

Best,
Tom

On Sat, May 18, 2024, 5:35 PM ROGER PIHLAJA <roger_pihlaja at msn.com> wrote:

> Hi Tom,
>
> It sounds like much more project than I am prepared to take on at the
> moment.  Good luck!
>
> Roger Pihlaja
> S/V Dynamic Equilibrium
> 1978  Sanford, MI
>
> Sent from my iPhone
>
> > On May 18, 2024, at 5:49 PM, Tom Van Heule <
> tom.vanheule at intrinsicprograms.com> wrote:
> >
> > Roger, this photo is inside a 16ft trailer.  I had no problem using a
> > truckbed to move it all.  I took it from northern MN to WI that way.  It
> > could probably go on a roof rack if an suv.  No pice is a "team lift".
> >
> > Thanks again,
> > Tom
> >
> >> On Sat, May 18, 2024, 4:43 PM Tom Van Heule <
> >> tom.vanheule at intrinsicprograms.com> wrote:
> >>
> >> Hi Roger.
> >> I attached photos of the welds, and the current storage situation, I was
> >> not home at the moment.
> >>
> >> I do not have the " lift base", this would attach to a.standard lift.
> >> pics is of what I have.  So most of the following questions I can't help
> >> with. I do not know who made it other than it was an employee of the
> >> previous owner.
> >>
> >> Maybe I should call it a custom cradle for the r22 rather a lift.
> >>
> >> Let me know,
> >>
> >>
> >>
> >>
> >>
> >> Thanks!
> >> Tom
> >>
> >>> On Tue, May 14, 2024, 7:26 AM ROGER PIHLAJA <roger_pihlaja at msn.com>
> wrote:
> >>>
> >>> Hi Tom,
> >>>
> >>> I have several questions:
> >>>
> >>>
> >>>  1.
> >>> The welding you refer to is on aluminum tubing?  Have these spots been
> >>> previously welded?  If they've been previously welded, can you supply a
> >>> photo of the previously welded spots?
> >>>  2.
> >>> Are the legs adjustable for water depth & how deep water can it handle?
> >>>  3.
> >>> None of the pictures illustrate the foot pads.  What style are they;
> i.e.
> >>> screw auger, mud pad, etc?
> >>>  4.
> >>> Manual or electric hoist?  If electric, what voltage and current
> circuit
> >>> is required?
> >>>  5.
> >>> In the pictures, the hoist is on the port side, can it be switched to
> the
> >>> starboard side?
> >>>  6.
> >>> Approximately, what does the lift weigh fully assembled?
> >>>  7.
> >>> Who built it originally, just in case I would need to order longer legs
> >>> &/or different style foot pads?
> >>>  8.
> >>> Disassembled, what are the dimensions of the longest component?
> >>>  9.
> >>> How much are you asking for it?
> >>>
> >>> Roger Pihlaja
> >>> S/V Dynamic Equilibrium
> >>> 1978  Sanford, MI
> >>>
> >>> ________________________________
> >>> From: Rhodes22-list <rhodes22-list-bounces at rhodes22.org> on behalf of
> >>> Tom Van Heule <tom.vanheule at intrinsicprograms.com>
> >>> Sent: Monday, May 13, 2024 12:44 PM
> >>> To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org>
> >>> Subject: [Rhodes22-list] Custom R22 lift for sale
> >>>
> >>> Hello everyone! Hope we're all well.
> >>>
> >>> As we since parted with our beloved Octopian and the new owners did not
> >>> want, I have a lift with no boat.
> >>>
> >>> Everything has been stored inside my enclosed trailer since pickup.
> >>> All the wood is fresh, the carpets are clean, the aluminum is straight.
> >>> There are two spots that need welding during assembly (else transport
> is
> >>> unfeasible).
> >>>
> >>> See photos, make offer. Located in Waukesha WI.  Else I will scrap
> >>> together
> >>> the frame of a small shed, lol. However as this is custom made for the
> >>> rarest best boat, I want to offer it here.  I also have all the
> hardware
> >>> and brackets too.
> >>>
> >>> Best,
> >>> Tom
> >>> -------------- next part --------------
> >>> A non-text attachment was scrubbed...
> >>> Name: 1000000575.jpg
> >>> Type: image/jpeg
> >>> Size: 93702 bytes
> >>> Desc: not available
> >>> URL: <
> >>>
> http://rhodes22.org/pipermail/rhodes22-list/attachments/20240513/74276220/attachment.jpg
> >>> <
> >>>
> http://rhodes22.org/pipermail/rhodes22-list/attachments/20240513/74276220/attachment.jpg
> >>>>>
> >>> -------------- next part --------------
> >>> A non-text attachment was scrubbed...
> >>> Name: 1000000577.jpg
> >>> Type: image/jpeg
> >>> Size: 409046 bytes
> >>> Desc: not available
> >>> URL: <
> >>>
> http://rhodes22.org/pipermail/rhodes22-list/attachments/20240513/74276220/attachment-0001.jpg
> >>> <
> >>>
> http://rhodes22.org/pipermail/rhodes22-list/attachments/20240513/74276220/attachment-0001.jpg
> >>>>>
> >>> -------------- next part --------------
> >>> A non-text attachment was scrubbed...
> >>> Name: IMG_20200828_204910_01.jpg
> >>> Type: image/jpeg
> >>> Size: 409046 bytes
> >>> Desc: not available
> >>> URL: <
> >>>
> http://rhodes22.org/pipermail/rhodes22-list/attachments/20240513/74276220/attachment-0002.jpg
> >>> <
> >>>
> http://rhodes22.org/pipermail/rhodes22-list/attachments/20240513/74276220/attachment-0002.jpg
> >>>>>
> >>> -------------- next part --------------
> >>> A non-text attachment was scrubbed...
> >>> Name: IMG_20200828_204852_04.jpg
> >>> Type: image/jpeg
> >>> Size: 93702 bytes
> >>> Desc: not available
> >>> URL: <
> >>>
> http://rhodes22.org/pipermail/rhodes22-list/attachments/20240513/74276220/attachment-0003.jpg
> >>> <
> >>>
> http://rhodes22.org/pipermail/rhodes22-list/attachments/20240513/74276220/attachment-0003.jpg
> >>>>>
> >>>
> >>
> > -------------- next part --------------
> > A non-text attachment was scrubbed...
> > Name: 1000000578.jpg
> > Type: image/jpeg
> > Size: 313222 bytes
> > Desc: not available
> > URL: <
> http://rhodes22.org/pipermail/rhodes22-list/attachments/20240518/310d7337/attachment.jpg
> >
> > -------------- next part --------------
> > A non-text attachment was scrubbed...
> > Name: 1000000579.jpg
> > Type: image/jpeg
> > Size: 328780 bytes
> > Desc: not available
> > URL: <
> http://rhodes22.org/pipermail/rhodes22-list/attachments/20240518/310d7337/attachment-0001.jpg
> >
>