The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

ROGER PIHLAJA



How to replace forward lower chainplates?

2024-08-02; 12:58:30 EDT

Member Since

2002-08-01

Posts: 1422

You use something like a hole saw to make a 4-1/2" ID hole in the cabin liner.  This will expose the plywood core and the old chainplate.  Remove the old chainplate and any plywood that's in the way, install a new chainplate made of straight SS bar stock, (Note that this new chainplate goes thru the original hole in the cabin roof)  and thru bolt it thru the outer cabin wall.  Then, install the Beckson inspection plate.  Easy peasy, it takes about 30 minutes to do each chainplate.  You can easily do all 4 inner chainplates in an afternoon.  Other than two round head machine screws + fender washers on the side of the cabin at each chain plate and 4 Beckson inspection plates in the cabin, the  installation will look stock.  But, you will be able to inspect/repair/replace the 4 inner chainplates whenever you want.

Roger Pihlaja
S/V Dynamic Equilibrium
1978  Sanford, MI

Roger Pihlaja

See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting