I have a Harken Unit 0 roller furler. I’ve had it ~25 years with zero issues. It has upper and lower swivels and I had a 150% Genoa made with a foam luff pad to take advantage of the swivels. I’m pretty happy with my Harken.
Roger Pihlaja
S/V Dynamic Equilbrium
Sent from my iPhone
> On Jul 2, 2019, at 2:16 PM, Lowe, Rob <rlowe at vt.edu> wrote:
>> Mine has got the CDI furler on it. I believe it's the FF2?? - rob
>>> -----Original Message-----
> From: Rhodes22-list <rhodes22-list-bounces at rhodes22.org> On Behalf Of Chris Cowie
> Sent: Tuesday, July 2, 2019 2:03 PM
> To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org>
> Subject: Re: [Rhodes22-list] GB roller furling jib
>> I suggest you consider replacing with a standard CDI furler
>>http://www.sailcdi.com/flexible-furlers>>>> Christopher P. Cowie
>> 700 N Fairfax Street
> Suite 304
> Alexandria, Virginia 22314
> 703.717.9103 ex.204 ? 202.270.1470 mobile [ccowie at cowieassociates.com]
>>>> Please consider the environment before printing this email.
>> -----Original Message-----
> From: Rhodes22-list <rhodes22-list-bounces at rhodes22.org> On Behalf Of Graham Stewart
> Sent: Tuesday, July 02, 2019 2:01 PM
> To: 'The Rhodes 22 Email List' <rhodes22-list at rhodes22.org>
> Subject: Re: [Rhodes22-list] GB roller furling jib
>> For what it is worth I replaces my ancient Cruising Design furling system with the Schafer Snap Furl. While I am quite satisfied with this system I have no experience with any of the others to draw comparisons with.
> Graham
>> Graham Stewart
> Agile 1976 Rhodes 22
> Kingston Ontario
>>>> -----Original Message-----
> From: Rhodes22-list [mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of David Talbot
> Sent: Monday, July 1, 2019 10:45 PM
> To: The Rhodes 22 Email List
> Subject: Re: [Rhodes22-list] GB roller furling jib
>> Buy a new furling system
> While the original is very creative it is a pain to dissemble and reassemble and hard to repair
>>>> On Mon, Jul 1, 2019 at 5:43 PM, Robert Allen <rca02536 at gmail.com> wrote:
>>>> I have a GB roller furling jib system that has issues.
>>>> Issue 1: The furling tube is attached to the forestay by plastic
>> sections connected by #8 x7/8” stainless steel screws. (#8 is an
>> est). The screws are backing out, allowing the jib to slip out of the
>> track. I am going to replace the screws. For anyone with experience
>> with this, would it be best to replace existing screws with like new
>> screws, replace the screws with the same size, but 1” long, or replace
>> screws with the next larger size and he same 7/8” length.
>>>> Issue 2: When setting the jib, the fork which guides the furling line
>> out of the line guard (lower cylinder around which the line wraps)
>> tries to wrap around the line guard thereby making setting or furling
>> the jib virtually impossible unless you head up to the bow and
>> manually unwrap the line and fork. Any ideas?
>>>> Bob Allen
>>>> S/V air force
>> Falmouth, MA
>>>>>>>
×
Message to Webmaster:
To use your email application to send a messsage to the webmaster rather than this form,
.