2019-07-28; 23:16:58 EDT
Member Since
2019-06-04
Posts: 463
Hi everyone, I'm now a Rhodes 22 owner. My boat arrived to Council Bluffs, Iowa from Florida on Thursday night, a friend and I put the mast up on Friday night after work, and I took it sailing on Saturday and Sunday. For the first couple of sails I went with some experienced people at our club. The Rhodes 22 isn't quite like anything else around here so it really sticks out from the usual boats around this size. It is quite popular! On the first trip out, I had yet to do a formal tuning. Wind was 12-14 knots. I was having issues with the boom getting stuck on the back stay, which led to some exciting moments when I wanted to de-power by letting out the sheet but it was stuck. Simply pushing on the back stay let the boom go out but I obviously have something incorrect. With the help of a friend who had a Loo's guage, this morning we tuned the rigging according to the IMF instructions posted by Roger Pihlaja at the link below. http://www.rhodes22.org/doclib/Rhodes22-RigTuning.doc The upper sidestays are at 300 lb and the lower sidestays are at 200 lb. While under sail I have the backstay tensioner cleated off, though I neglected to measure the tension with the guage. I'm still having issues with the boom hitting the backstay. There are a couple of work arounds: 1. Lower the main (requires the pop top to be down) and lowers boom clearance for everyone in the cockpit 2. Pull the traveler bar slightly towards the rear rail with a load strap. This isn't ideal since it puts some bend in the back stays where it is not intended. I forgot to take a photo of the whole stern to show entire setup, but I attached a couple of photos that provide some perspective. One shows how I used a load strap to pull the traveler bar slightly towards the rear rail. The second is me (starboard side in blue life jacket where you can see the traveler bar, backstays, and the backstay tensioner. The third shows how much clearance there is for the boom against the backstay when there is low wind and I have the traveler bar pulled back some as I mentioned earlier. 20190728_144123.jpg -- Sent from: http://rhodes-22.1065344.n5.nabble.com/See the original archive post