Jessie,
I took another look at your photos. It does appear that you have no boom topping lift. But, this would not cause the end of the boom to hit the backstays. The topping lift supports the aft end of the boom when the mainsail is not in use or when the wind is so light that you want to take the weight of the boom off the mainsail for the purpose of achieving better light air sail shape. If the topping lift is adjusted too high; then, you could have an issue with the end of the boom hitting the backstays. But, since your topping lift isn’t even hooked up, you don’t have that issue.
Your backstays appear to be tight and I see what looks like the backstay adjuster rigged down to the port side of the transom. I presume the backstay adjuster tackle is simply too high & out of view the picture. Chris is correct. If the backstays are too loose; then, you could have an issue with the boom hitting the backstays. But, that does not appear to be the case.
I am assuming the boom is at the standard height? If the boom is too high on the mast for some reason; then, that could cause the end of the boom to hit the backstays. But, the inner mast furling mechanism pretty much sets the boom height. So, unless you have something else, it’s hard to understand how the gooseneck could be too high on the mast.
Once again, I come back to the hypothesis that your mast is reclined too far aft.
Roger Pihlaja
S/V Dynamic Equilibrium
Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10