On Mon, Jul 29, 2019 at 8:19 AM ROGER PIHLAJA <Roger_Pihlaja at msn.com> wrote:
> Jessie,
>>>> I took another look at your photos. It does appear that you have no boom
> topping lift. But, this would not cause the end of the boom to hit the
> backstays. The topping lift supports the aft end of the boom when the
> mainsail is not in use or when the wind is so light that you want to take
> the weight of the boom off the mainsail for the purpose of achieving better
> light air sail shape. If the topping lift is adjusted too high; then, you
> could have an issue with the end of the boom hitting the backstays. But,
> since your topping lift isn’t even hooked up, you don’t have that issue.
>>>> Your backstays appear to be tight and I see what looks like the backstay
> adjuster rigged down to the port side of the transom. I presume the
> backstay adjuster tackle is simply too high & out of view the picture.
> Chris is correct. If the backstays are too loose; then, you could have an
> issue with the boom hitting the backstays. But, that does not appear to be
> the case.
>>>> I am assuming the boom is at the standard height? If the boom is too high
> on the mast for some reason; then, that could cause the end of the boom to
> hit the backstays. But, the inner mast furling mechanism pretty much sets
> the boom height. So, unless you have something else, it’s hard to
> understand how the gooseneck could be too high on the mast.
>>>> Once again, I come back to the hypothesis that your mast is reclined too
> far aft.
>>>> Roger Pihlaja
>> S/V Dynamic Equilibrium
>>>> Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for
> Windows 10
>>>> ________________________________
> From: Rhodes22-list <rhodes22-list-bounces at rhodes22.org> on behalf of
> Chris Cowie <ccowie at cowieassociates.com>
> Sent: Monday, July 29, 2019 7:39:33 AM
> To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org>
> Subject: Re: [Rhodes22-list] boom hitting back stays
>> Jesse
> Look at the 360 images of my boat at the link below to see the back stay
> adjusters, that might be the problem you are having.
>https://www.voilieryachts.com/boat-a909>>>>>> Please note our new office address and phone number
>> Christopher P. Cowie [cid:image001.png at 01CA3AD3.5BD581F0]
> [cid:image002.png at 01CA3AD3.5BD581F0]
>> 700 N Fairfax Street<x-apple-data-detectors://2/0>
> Suite 304<x-apple-data-detectors://2/0>
> Alexandria, Virginia 22314<x-apple-data-detectors://2/0>
> 703.717.9103<tel:703.717.9103> ex.204 ? 202.270.1470<tel:202.270.1470>
> mobile
> [ccowie at cowieassociates.com<mailto:ccowie at cowieassociates.com>]
>> [cid:image001.jpg at 01D24014.7A2D04E0]
>> Please consider the environment before printing this email.
>>> On Jul 29, 2019, at 7:35 AM, Chris Cowie <ccowie at cowieassociates.com> <mailto:ccowie at cowieassociates.com>> wrote:
>> Jesse
> I don’t see the topping lift connected to the boom in your photo, I also
> don’t see the back stay adjusters.
>>> Please note our new office address and phone number
>> Christopher P. Cowie [cid:image001.png at 01CA3AD3.5BD581F0]
> [cid:image002.png at 01CA3AD3.5BD581F0]
>> 700 N Fairfax Street<x-apple-data-detectors://2/0>
> Suite 304<x-apple-data-detectors://2/0>
> Alexandria, Virginia 22314<x-apple-data-detectors://2/0>
> 703.717.9103<tel:703.717.9103> ex.204 ? 202.270.1470<tel:202.270.1470>
> mobile
> [ccowie at cowieassociates.com<mailto:ccowie at cowieassociates.com>]
>> [cid:image001.jpg at 01D24014.7A2D04E0]
>> Please consider the environment before printing this email.
>>> On Jul 29, 2019, at 2:27 AM, Shawn Boles <shawn.sustain at gmail.com<mailto:
>shawn.sustain at gmail.com>> wrote:
>> Hi:
>> The rig is w/ fore stay and back stays adjusted so mast is vertical. The
> fore/center/aft shrouds should be equally ***hand-tight*** on
> port/starboard.
>> Stan is quite clear about this.
>>> Put your gauge away...
>> Cheers,
> Shawn
> s/v Sweet Baboo
>>>>> On Sun, Jul 28, 2019, 8:54 PM ROGER PIHLAJA <roger_pihlaja at msn.com<mailto:
>roger_pihlaja at msn.com>> wrote:
>> Jessie,
>> My guess is your mast is reclined too far aft. The forestay needs to be
> shorter. There should be a turnbuckle under the roller furling drum. The
> upper and lower sidestays will need to be adjusted as well. Check your
> owner’s manual for instructions on setting up the standing rigging.
> Besides not having the boom hit the backstays, you will also benefit from
> less weather helm after you make this adjustment.
>> Roger Pihlaja
> S/V Dynamic Equilbrium
>> Sent from my iPhone
>> On Jul 28, 2019, at 11:20 PM, Jesse Shumaker <
>jesse.laten.shumaker at gmail.com<mailto:jesse.laten.shumaker at gmail.com>>
> wrote:
>> Sorry, accidentally submitted before adding the additional photos:
> <http://rhodes-22.1065344.n5.nabble.com/file/t907/20190728_144713.jpg>
> <http://rhodes-22.1065344.n5.nabble.com/file/t907/20190728_144140.jpg>
>> I must have something setup wrong so any advice would be appreciated.
> I'm
> only a year into sailing so I apologize in advance for asking silly
> questions. Thanks!
>>>> --
> Sent from: http://rhodes-22.1065344.n5.nabble.com/>><http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
Virus-free.
www.avg.com
<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
×
Message to Webmaster:
To use your email application to send a messsage to the webmaster rather than this form,
.