The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

Peter Nyberg



Rhodes didn’t come with an anchor

2019-11-02; 17:11:44 EDT

Member Since

2016-04-14

Posts: 713

Allyn,

My boat came out of the General Boats ‘Recycle’ program with a Fortress FX7.  It hangs from the bow pulpit, and the end of the shaft is pinned to a U bracket at the very tip of the bow.      It’s an elegant storage solution, but a bit tricky to implement as the length of the hangers plus the length of the anchor have to be right with a pretty close tolerance to get the hole at the end of the anchor shaft to line up with the pin at the bow.  If you want to take this approach, I’d suggest you contact General Boats and see if they can supply you with appropriate hardware.

But, as much as I thought that location for the anchor was clever, it never seemed very convenient. I’ve never anchored with the Fortress.  

I use a 15 lb Manson Supreme.  Prior to this season (now behind us, alas),  I’ve kept this in a Rubbermaid tub in the lazarette along with its rode.  The rode is 10’ of 1/4” chain and 200’ of 3/8” three strand nylon.  The rode is coiled in a 2.5 gallon bucket from the Home Depot paint department.  When I’m approaching an anchorage, I’ll take the tub from the lazarette, carry it through the cockpit and the cabin and place it on the forward cabin roof (I almost always have the pop-top up when underway).  When I’m ready to anchor, I’ll walk up to the bow and and throw the anchor over.

Last winter I added a bow sprit and a bow roller, so now the Manson lives on the bow full time.

Peter Nyberg
Coventry, CT
s/v Silverheels (1988/2016)

See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting