2020-03-01; 22:21:15 EST
Member Since
2019-04-30
Posts: 151
Mike got my response, I was just responding to his mail which he sent to me via the List. He is sending his followup emails to general boat now directly to stan at generalboats.com. However, with Dana and I having the attention of so many brains, we have a rigging hangup. Dana, who sails in Belize, where rigging shops are scarce, wanted clockwise tightening on two shrouds we are sending him. We were down to our last one so ordered a batch from our supplier. But while they arrived marked R, in each of the misc. bodies we had in our 50 year collection, the thread swage-on-fittings they sent, while marked R, tightened counter clockwise. (No problem with the fork ends that swaged to the top end of the 1/8" shroud wire.) So: 1. Looking down on the top of a turnbuckle /barrel/ wouldn't the R designation of the /threaded studs/ swaged at the bottom end of a stay, indicate clockwise barrel rotation? 2. Does the /barrel/ itself also have to be ordered as one designed for the tightening direction wanted? We turned the /barrel/ upside down and the R /threaded stud/ would not thread into the other end of the /barrel/, in /either/ direction, in any of the /barrels/ (turnbuckle bodies) in our collection. 3. And finally all of your boats use a threaded toggle jaw at the chain plate end of each stay's turnbuckle. I assume these also have to be ordered to match the clockwise or counter direction wanted from the assembly? No question about all this for 60 years; the rigging came to us as complete assemblies. Now in the parts business, we have to learn about the parts that make up the turnbuckles. Dana would like to just order stays with threaded ends so he can use them with his existing turnbuckles on his 81. We are inventoried to do this but now are concerned as to whether they will work with his current turnbuckles. If no easy way out than Dana finding out the hard way, we will call Hayn, our supplier late tomorrow. My lazy way out is just to buy the barrel and threaded toggle that go with the swaged studs we already purchased from them. Just wanted to give you all a break from floating trailers, which I like since you can retrieve from shorter ramps. stanSee the original archive post