The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

Graham Stewart



Keep well

2020-03-30; 10:18:18 EDT

Member Since

2005-04-29

Posts: 815

Jeff:

I keep my boat at my home at my dock but in the fall the water drops on lake
Ontario to the point where I have insufficient depth. At that point I moor
the boat in the bay using a mooring I made of steel and concrete that I
guess weights 500 lbs or so. Three or for other boats have been kept on
moorings here the entire season for decades.

Several years ago the chain for one of the boats broke and the boat was
washed ashore. The lesson here is that the owner shackled the mooring chain
directly to the boat - which one should never do. You want the chain to end
at the mooring float and the boat tied to the float with sufficiently strong
and chafe-protected lines. This provides some elasticity to the whole
system. The constant jerking on a chain can easily break it.

Also, make sure that the rudder is well secured and tied facing forward.
Once, in rough circumstances, the lower gudgeon popped out and the rudder
thrashed about for probably a day or more causing a lot of scratches and
gouges to the transom of the boat. I was lucky not to lose rudder.

When properly secured and with adequate mooring weight the boats can weather
through very rough waters. 

Graham



See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting