Jay,
The photo came through, and I can see the track mounted to your toe-rail. I can see the advantage, as it reduces clutter underfoot. I also notice a chock mounted to the toe-rail forward, so it would seem that perhaps the entire toe-rail is solid fiberglass, not just the area under the track.
Thanks for sharing…
—Peter
> On Apr 22, 2020, at 4:41 PM, Jay Friedland <jayf401 at gmail.com> wrote:
>> Peter,
> Just trying to get a test photo through the server.
>> I actually liked Stan's adjustable inboard sheeting system vs. the fixed
> cabin top cam cleat newer version. It is a tripping hazard and more
> expensive than the single cleat and fairlead, and not used often enough,
> but a good idea.
>> On Wed, Apr 22, 2020 at 3:46 PM Peter Nyberg <peter at sunnybeeches.com> wrote:
>>> Jay,
>>>> I’m confused about your reply. You say you’re mounting your cleats on the
>> forward jib track, but you also say that the track is bolted to the
>> toe-rail. My forward jib tracks are mounted to the deck very close to the
>> cabin side (a little too close in fact). Also, in a discussion not too far
>> back someone (Graham I think) attached a photo showing that the toe-rails
>> on his R22 are hollow, not solid fiberglass.
>>>> As to your problem with posting photos, it may have nothing to do with
>> format. The mail list software apparently doesn’t like the way that the
>> Mac email client program does attachments. Perhaps there are other email
>> client programs with similar issues.
>>>> Peter Nyberg
>> Coventry, CT
>> s/v Silverheels (1988/2016)
>>>>> On Apr 22, 2020, at 3:29 PM, Jay Friedland <jayf401 at gmail.com> wrote:
>>>>>> Jesse,
>>> I assume my photos of that got stripped away, I tried attaching them as
>> pdf’s. Any help from da list to format them correctly on that is
>> appreciated.
>>>>>> My midship cleats are movable on a 1” T-track, same track as the jib
>> cars move on. As any tension is shearing against the mounting screws for
>> the track, I drilled and tapped 1-1/2”x1/4x20’s into the toerail. These
>> were installed when the boat was new 23 years ago, and there has been
>> extreme pressure fairly constantly from April through November storms, up
>> to 4’ rolling waves with heavy tidal swings all through my time in less
>> safe slips. So they are stress tested.
>>>>>>>>>> On Apr 22, 2020, at 3:12 PM, Jesse Shumaker <
>>jesse.laten.shumaker at gmail.com> wrote:
>>>>>>>> I assume the mid ship cleats may have been added by owners. My boat
>> does not
>>>> have any midship cleats so I have used the metal grab rails as Sean
>>>> mentioned.
>>>>>>>> Does anyone have photos to show where exactly the midship cleats are
>>>> installed? When I installed chocks on my foredeck, I found that it was
>>>> hard to get to the underside of the toe rail, so I installed the chocks
>>>> further from the toe rail where I could access the bolts coming through.
>>>>>>>> I assume a backing plate against the cabin roof would be needed when
>>>> installing the midship cleats. If anyone has examples of the mid ship
>> cleat
>>>> installation that would be good to share.
>>>>>>>>>>>>>>>> --
>>>> Sent from: http://rhodes-22.1065344.n5.nabble.com/>>>>>>>> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: R22.midship cleat, etc.png
> Type: image/png
> Size: 3979941 bytes
> Desc: not available
> URL: <http://rhodes22.org/pipermail/rhodes22-list/attachments/20200422/b7b92767/attachment.png>
×
Message to Webmaster:
To use your email application to send a messsage to the webmaster rather than this form,
.