< prior
Back to Month
Go to Thread
2020-04-23; 20:22:39 EDT
Member Since
2002-09-10
Posts: 976
I guess I must have confused you with someone else, and it may have been the mount for a UPS, as I give it more thought. Sorry about that. Todd T. tavares0947 at gmail.comSee the original archive post
On Thu, Apr 23, 2020, 8:18 PM ROGER PIHLAJA <roger_pihlaja at msn.com> wrote: > Todd, > > Huh? Why would I want to do that? > > Roger Pihlaja > S/V Dynamic Equilibrium > > Sent from my iPhone > > > On Apr 23, 2020, at 7:26 PM, Todd Tavares <tavares0947 at gmail.com> wrote: > > > > ?Roger, > > > > Didn't you link the backing plate of your bow deck cleat to the backing > > plate of the bow eye? > > > > Todd T. > > > > tavares0947 at gmail.com > > > >> On Thu, Apr 23, 2020, 5:52 PM ROGER PIHLAJA <roger_pihlaja at msn.com> > wrote: > >> > >> Hi All, > >> > >> There is a real advantage to rigging the anchor line thru the bow eye > vs. > >> directly to the bow cleat. The choice of the bow eye vs. the bow cleat > has > >> a significant effect on the anchor scope. This is because the bow eye > is > >> ~1.5 ft closer to the water vs the bow cleat. For example, suppose we > are > >> anchoring in 7 feet of water. The bow eye is ~2 feet above the water > and > >> the bow cleat is ~3.5 feet above the water. Suppose we let out 65 feet > of > >> anchor rode. The scope using the bow eye is 65 / (7 + 2) = 7.2 The > scope > >> using the bow cleat is 65 / (7 + 3.5) = 6.2 A scope of 7.2 is > sufficient > >> for decent overnight holding with a minimum 65 foot radius swing > circle. A > >> scope of 6.2 is marginal for an overnight night stay. Sometimes, there > >> isn’t sufficient swing room to let out more anchor rode, say if you are > the > >> last boat to drop the hook in a crowded anchorage. In addition, it’s > >> considered bad anchoring etiquette to use up all the swing room in an > >> anchorage even if you are the first one there. > >> > >> Fortunately, you don’t have to tie off to the bow eye in order to get > the > >> scope advantage of using it. Simply run the anchor rode thru the bow > eye > >> first, then up to the bow cleat, and cleat it off. This will give you > all > >> the scope advantage of using the bow eye and all the ease of tying off > to > >> the bow cleat. When departing, reach down and hook the anchor rode > with a > >> boat hook below the bow eye. Pull the anchor rode on board, hang on to > it, > >> and then uncleat the rode from the bow cleat. Easy peasy and no stress > on > >> the knees! > >> > >> I always use the bow eye in the manner described above. There is just > no > >> reason not to, the extra safety margin on scope helps me sleep better, > and > >> I don’t annoy my fellow boaters. > >> > >> Roger Pihlaja > >> S/V Dynamic Equilibrium > >> > >> Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for > >> Windows 10 > >> > >> From: Lowe, Rob<mailto:rlowe at vt.edu> > >> Sent: Thursday, April 23, 2020 10:16 AM > >> To: The Rhodes 22 Email List<mailto:rhodes22-list at rhodes22.org>; Art > >> Czerwonky<mailto:a_czerwonky at yahoo.com> > >> Subject: Re: [Rhodes22-list] Spring Lines > >> > >> I must say I read that wrong. Even though I responded bow eye, I was > >> thinking bow cleat. I agree with Graham's method using two lines > running > >> through the chocks to the bow cleat. - rob > >> > >> ________________________________ > >> From: Rhodes22-list <rhodes22-list-bounces at rhodes22.org> on behalf of > Art > >> Czerwonky via Rhodes22-list <rhodes22-list at rhodes22.org> > >> Sent: Thursday, April 23, 2020 10:03 AM > >> To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org> > >> Subject: Re: [Rhodes22-list] Spring Lines > >> > >> I agree fully with your recommendation, Graham. The bow eye is not > >> suitable for the shock loads of mooring. Art CzerwonkyMaryJane, Atlanta > >> Sent from Yahoo Mail on Android > >> > >> On Thu, Apr 23, 2020 at 9:44 AM, Graham Stewart<gstewart8 at cogeco.ca> > >> wrote: Personally I prefer to not use the bow eye for mooring. For one > >> thing it is difficult to reach the bow eye if you have old knees. I > prefer > >> to rune two nylon lines from the mooring through the chocks and to the > bow > >> cleat. It is much easier to attach and release and gives you two lines > >> instead of one. I have no doubt that either the eye or the cleat is > plenty > >> strong. Whichever you use do not connect the boat to the mooring with > chain. > >> > >> Graham Stewart > >> Agile 1976 Rhodes 22 > >> Kingston Ontario > >> > >> > >> > >> > >> -----Original Message----- > >> From: Rhodes22-list [mailto:rhodes22-list-bounces at rhodes22.org] On > Behalf > >> Of Lowe, Rob > >> Sent: Thursday, April 23, 2020 9:02 AM > >> To: The Rhodes 22 Email List > >> Subject: Re: [Rhodes22-list] Spring Lines > >> > >> I can't speak for Stan, but I've never heard of a bow eye on the Rhodes > >> giving way. Still doesn't mean it can't happen. I'd inspect the > backing > >> plate up in the V berth next time you can and see if it's snug and looks > >> adequate. - rob > >> > >> ________________________________ > >> From: Rhodes22-list <rhodes22-list-bounces at rhodes22.org> on behalf of > >> Goodness <spreadgoodnews at gmail.com> > >> Sent: Wednesday, April 22, 2020 5:36 PM > >> To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org> > >> Subject: Re: [Rhodes22-list] Spring Lines > >> > >> I went with a mooring this year. Stan do you think the bow eye alone > can > >> hold? A noreaster is rolling into my anchorage tonight! > >> ? > >> > >>>> On Apr 22, 2020, at 5:01 PM, Sean Allen <seanallen1206 at gmail.com> > wrote: > >>> > >>> ?Thanks Jay (and all) as this has been really helpful. > >>> > >>> I've got 6 pilings in my slip. I was thinking of using two 3/8" bow > lines > >>> around each piling with snubbers both connected to the bow cleat, then > >> two > >>> 3/8" stern lines with snubbers each connected from the piling to each > >> stern > >>> cleat, and I think i might put spring cleats in approximately mid-ship > by > >>> the windows and run a 1/2" spring line with snubbers on each side > (using > >>> the grab rails temporarily). > >>> > >>> > >>>> On Wed, Apr 22, 2020 at 2:15 PM Jay Friedland <jayf401 at gmail.com> > >> wrote: > >>>> > >>>> Sean, > >>>> I should also add that the Tide-minders prevent any side movement in > my > >>>> relatively narrow slip. On the spring lines, I use heavy-duty snubbers > >> (for > >>>> up to 5/8” line) to give the boat some forward movement beyond the > >> stretch > >>>> of the lines. With the occasional excessive tides, I use the midship > >> cleat > >>>> adjustment along with the snubbers to keep the boat centered with > >> tension, > >>>> not just the extreme stretch of the spring lines. > >>>> Jay > >>>> > >>>>>> On Apr 22, 2020, at 1:58 PM, Jay Friedland <JayF401 at gmail.com> > wrote: > >>>>> > >>>>> Sean, > >>>>> It all depends on the exposure to the elements. Mel & I are on the > same > >>>> island but completely different factors to deal with. Mel is fairly > >>>> protected in a lagoon, so his lines are fine for that location. > >> Wanderlust > >>>> is in a narrow slip in a marina with a sea wall surrounding the > boats. > >> It > >>>> has 11’ of clearance, and exposed to high winds, some wave action and > >> up to > >>>> 2-1/2’ of tidal change. While it’s not all visible in the attached > photo > >>>> (if it’s not stripped away), is the following, using all 1/2” lines- > >>>>> > >>>>> 1) bow lines to pilings at a 90° > >>>>> 2) spring lines to adjustable midship cleats on 1” T-tracks, 30” of > >>>> movement > >>>>> 3) Tide-minders on each stern line > >>>>> > >>>>> I’ve been through over 12 seasons of squalls, glancing hurricanes, > >>>> excessive tides and only have to worry about other people’s boats. The > >>>> other advantage of midship cleats is the versatility of docking in > many > >>>> situations. I hope this helps. > >>>>> > >>>>> Jay Friedland > >>>>> S/v Wanderlust, ‘97 > >>>>> > >>>>> > >>>>> <Screen Shot 2020-04-22 at 1.40.16 PM.png> > >>>>> > >>>>>> On Apr 22, 2020, at 1:22 PM, Sean Allen <seanallen1206 at gmail.com > >>>> <mailto:seanallen1206 at gmail.com>> wrote: > >>>>>> > >>>>>> I'm launching my boat in to a new slip in a few weeks and I'm > curious > >> if > >>>>>> and how other Rhodes owners use spring lines? Mine only has one bow > >>>> cleat > >>>>>> and two on the stern. > >>>>>> > >>>>>> I've heard of others using the grab rail on the bulk head mentioned. > >>>>>> > >>>>>> Has anyone installed additional cleats? Is that advisable? > >>>>>> > >>>>>> The marina is in tidal waters (Barnegat Bay) with quite a bit of > wake > >>>> on a > >>>>>> daily basis. > >>>>>> > >>>>>> Sean > >>>>> > >>>> > >>>> > >> > >> > >> On Thu, Apr 23, 2020, 5:52 PM ROGER PIHLAJA <roger_pihlaja at msn.com> > wrote: > >> > >> Hi All, > >> > >> There is a real advantage to rigging the anchor line thru the bow eye > vs. > >> directly to the bow cleat. The choice of the bow eye vs. the bow cleat > has > >> a significant effect on the anchor scope. This is because the bow eye > is > >> ~1.5 ft closer to the water vs the bow cleat. For example, suppose we > are > >> anchoring in 7 feet of water. The bow eye is ~2 feet above the water > and > >> the bow cleat is ~3.5 feet above the water. Suppose we let out 65 feet > of > >> anchor rode. The scope using the bow eye is 65 / (7 + 2) = 7.2 The > scope > >> using the bow cleat is 65 / (7 + 3.5) = 6.2 A scope of 7.2 is > sufficient > >> for decent overnight holding with a minimum 65 foot radius swing > circle. A > >> scope of 6.2 is marginal for an overnight night stay. Sometimes, there > >> isn’t sufficient swing room to let out more anchor rode, say if you are > the > >> last boat to drop the hook in a crowded anchorage. In addition, it’s > >> considered bad anchoring etiquette to use up all the swing room in an > >> anchorage even if you are the first one there. > >> > >> Fortunately, you don’t have to tie off to the bow eye in order to get > the > >> scope advantage of using it. Simply run the anchor rode thru the bow > eye > >> first, then up to the bow cleat, and cleat it off. This will give you > all > >> the scope advantage of using the bow eye and all the ease of tying off > to > >> the bow cleat. When departing, reach down and hook the anchor rode > with a > >> boat hook below the bow eye. Pull the anchor rode on board, hang on to > it, > >> and then uncleat the rode from the bow cleat. Easy peasy and no stress > on > >> the knees! > >> > >> I always use the bow eye in the manner described above. There is just > no > >> reason not to, the extra safety margin on scope helps me sleep better, > and > >> I don’t annoy my fellow boaters. > >> > >> Roger Pihlaja > >> S/V Dynamic Equilibrium > >> > >> Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for > >> Windows 10 > >> > >> From: Lowe, Rob<mailto:rlowe at vt.edu> > >> Sent: Thursday, April 23, 2020 10:16 AM > >> To: The Rhodes 22 Email List<mailto:rhodes22-list at rhodes22.org>; Art > >> Czerwonky<mailto:a_czerwonky at yahoo.com> > >> Subject: Re: [Rhodes22-list] Spring Lines > >> > >> I must say I read that wrong. Even though I responded bow eye, I was > >> thinking bow cleat. I agree with Graham's method using two lines > running > >> through the chocks to the bow cleat. - rob > >> > >> ________________________________ > >> From: Rhodes22-list <rhodes22-list-bounces at rhodes22.org> on behalf of > Art > >> Czerwonky via Rhodes22-list <rhodes22-list at rhodes22.org> > >> Sent: Thursday, April 23, 2020 10:03 AM > >> To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org> > >> Subject: Re: [Rhodes22-list] Spring Lines > >> > >> I agree fully with your recommendation, Graham. The bow eye is not > >> suitable for the shock loads of mooring. Art CzerwonkyMaryJane, Atlanta > >> Sent from Yahoo Mail on Android > >> > >> On Thu, Apr 23, 2020 at 9:44 AM, Graham Stewart<gstewart8 at cogeco.ca> > >> wrote: Personally I prefer to not use the bow eye for mooring. For one > >> thing it is difficult to reach the bow eye if you have old knees. I > prefer > >> to rune two nylon lines from the mooring through the chocks and to the > bow > >> cleat. It is much easier to attach and release and gives you two lines > >> instead of one. I have no doubt that either the eye or the cleat is > plenty > >> strong. Whichever you use do not connect the boat to the mooring with > chain. > >> > >> Graham Stewart > >> Agile 1976 Rhodes 22 > >> Kingston Ontario > >> > >> > >> > >> > >> -----Original Message----- > >> From: Rhodes22-list [mailto:rhodes22-list-bounces at rhodes22.org] On > Behalf > >> Of Lowe, Rob > >> Sent: Thursday, April 23, 2020 9:02 AM > >> To: The Rhodes 22 Email List > >> Subject: Re: [Rhodes22-list] Spring Lines > >> > >> I can't speak for Stan, but I've never heard of a bow eye on the Rhodes > >> giving way. Still doesn't mean it can't happen. I'd inspect the > backing > >> plate up in the V berth next time you can and see if it's snug and looks > >> adequate. - rob > >> > >> ________________________________ > >> From: Rhodes22-list <rhodes22-list-bounces at rhodes22.org> on behalf of > >> Goodness <spreadgoodnews at gmail.com> > >> Sent: Wednesday, April 22, 2020 5:36 PM > >> To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org> > >> Subject: Re: [Rhodes22-list] Spring Lines > >> > >> I went with a mooring this year. Stan do you think the bow eye alone > can > >> hold? A noreaster is rolling into my anchorage tonight! > >> ? > >> > >>>> On Apr 22, 2020, at 5:01 PM, Sean Allen <seanallen1206 at gmail.com> > wrote: > >>> > >>> ?Thanks Jay (and all) as this has been really helpful. > >>> > >>> I've got 6 pilings in my slip. I was thinking of using two 3/8" bow > lines > >>> around each piling with snubbers both connected to the bow cleat, then > >> two > >>> 3/8" stern lines with snubbers each connected from the piling to each > >> stern > >>> cleat, and I think i might put spring cleats in approximately mid-ship > by > >>> the windows and run a 1/2" spring line with snubbers on each side > (using > >>> the grab rails temporarily). > >>> > >>> > >>>> On Wed, Apr 22, 2020 at 2:15 PM Jay Friedland <jayf401 at gmail.com> > >> wrote: > >>>> > >>>> Sean, > >>>> I should also add that the Tide-minders prevent any side movement in > my > >>>> relatively narrow slip. On the spring lines, I use heavy-duty snubbers > >> (for > >>>> up to 5/8” line) to give the boat some forward movement beyond the > >> stretch > >>>> of the lines. With the occasional excessive tides, I use the midship > >> cleat > >>>> adjustment along with the snubbers to keep the boat centered with > >> tension, > >>>> not just the extreme stretch of the spring lines. > >>>> Jay > >>>> > >>>>>> On Apr 22, 2020, at 1:58 PM, Jay Friedland <JayF401 at gmail.com> > wrote: > >>>>> > >>>>> Sean, > >>>>> It all depends on the exposure to the elements. Mel & I are on the > same > >>>> island but completely different factors to deal with. Mel is fairly > >>>> protected in a lagoon, so his lines are fine for that location. > >> Wanderlust > >>>> is in a narrow slip in a marina with a sea wall surrounding the > boats. > >> It > >>>> has 11’ of clearance, and exposed to high winds, some wave action and > >> up to > >>>> 2-1/2’ of tidal change. While it’s not all visible in the attached > photo > >>>> (if it’s not stripped away), is the following, using all 1/2” lines- > >>>>> > >>>>> 1) bow lines to pilings at a 90° > >>>>> 2) spring lines to adjustable midship cleats on 1” T-tracks, 30” of > >>>> movement > >>>>> 3) Tide-minders on each stern line > >>>>> > >>>>> I’ve been through over 12 seasons of squalls, glancing hurricanes, > >>>> excessive tides and only have to worry about other people’s boats. The > >>>> other advantage of midship cleats is the versatility of docking in > many > >>>> situations. I hope this helps. > >>>>> > >>>>> Jay Friedland > >>>>> S/v Wanderlust, ‘97 > >>>>> > >>>>> > >>>>> <Screen Shot 2020-04-22 at 1.40.16 PM.png> > >>>>> > >>>>>> On Apr 22, 2020, at 1:22 PM, Sean Allen <seanallen1206 at gmail.com > >>>> <mailto:seanallen1206 at gmail.com>> wrote: > >>>>>> > >>>>>> I'm launching my boat in to a new slip in a few weeks and I'm > curious > >> if > >>>>>> and how other Rhodes owners use spring lines? Mine only has one bow > >>>> cleat > >>>>>> and two on the stern. > >>>>>> > >>>>>> I've heard of others using the grab rail on the bulk head mentioned. > >>>>>> > >>>>>> Has anyone installed additional cleats? Is that advisable? > >>>>>> > >>>>>> The marina is in tidal waters (Barnegat Bay) with quite a bit of > wake > >>>> on a > >>>>>> daily basis. > >>>>>> > >>>>>> Sean > >>>>> > >>>> > >>>> > >> > >> >
To use your email application to send a messsage to the webmaster rather than this form, .
Your post is being sent... 