2020-05-30; 08:30:19 EDT
Member Since
2002-08-01
Posts: 1438
Peter, Just for snicks and grins and because I have no life here in the post flood Sanford Lake wasteland, I tried making the rudder position measurement on S/V Dynamic Equilibrium. Both of my gudgeons were slightly off the transom centerline determined as described below. The centerline of the top gudgeon was off the transom centerline by ~2 mm to starboard and the bottom gudgeon was off by ~1 mm to starboard. This is probably close to the limit of precision of the measurement method itself. I’ll be interested in hearing what you come up with. Roger Pihlaja S/V Dynamic Equilibrium Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10 From: ROGER PIHLAJA<mailto:roger_pihlaja at msn.com> Sent: Friday, May 29, 2020 7:57 PM To: The Rhodes 22 Email List<mailto:rhodes22-list at rhodes22.org> Subject: Re: [Rhodes22-list] Rudder Askew Peter, Whew, this is a new one! The thing about boats is there no such thing as square or plumb. Everything is all faired curves and angles. I guess what I would do is determine the midpoint of the transom on a line from gunnel to gunnel. From this midpoint, draw a line down to the center of the curve at the bottom of the transom. This curve has ~3” Radius and the center of it should be easy to determine. Both gudgeons should be located on this transom centerline no matter if this line is exactly vertical or not. As far as what the acceptable tolerance for being on the centerline is, you would have to ask Stan. However, I would think it would be very helpful for him to have your measurement. I can’t wait to hear the result of your measurement. Good luck! Roger Pihlaja S/V Dynamic Equilibrium Sent from my iPhoneSee the original archive post