< prior
Back to Month
Go to Thread
2020-06-01; 06:13:08 EDT
Member Since
2018-09-18
Posts: 52
Anyone have pictures of how the “scrap hose pieces” fit around the diamondboard? IMG_3700.jpgSee the original archive post
On Sat, May 30, 2020 at 2:19 PM Olivier Hecht <oehecht at gmail.com> wrote: > I was also not shocked to not find the “two scraps of garden hose” I’ve > heard so much about. I think they dampen noise and movement near the pivot > of the board, and my board does “rattle” while sailing whenever it’s not > fully loaded. Does anyone have pictures of how/where those pieces of hose > should go when I reassemble everything? Thanks again! > > On Sat, May 30, 2020 at 11:51 AM Olivier Hecht <oehecht at gmail.com> wrote: > >> Got the board pulled today and the local yard should be able to repair it >> this week. Here is a picture in case anyone is curious about the layers of >> construction. >> >> >> >> On Mon, May 25, 2020 at 12:00 PM Olivier Hecht <oehecht at gmail.com> wrote: >> >>> Thanks Stan. I already have two of those three upgrades and love them >>> but have been thinking about a new tiller at some point! >>> >>> On Mon, May 25, 2020 at 11:02 AM stan <stan at generalboats.com> wrote: >>> >>>> >>>> Oliver, >>>> >>>> www.rhodes22parts.com has parts for the Rhodes that are not available >>>> from marine suppliers. In the case of your diamond board however I do >>>> think that it would be less costly if you have your current one >>>> repaired >>>> locally. Freight alone for a centerboard can be an item. With all >>>> that >>>> saving how about a new style outhaul car or a fabulous fiberglass >>>> tiller >>>> or the new invention traveler system. >>>> >>>> While you got me to my keyboard, a comment. Every action has an equal >>>> and opposite reaction. Every recycled and new Rhodes has a yoke that >>>> prevents the genoa line from leaving its drum so the energy needed to >>>> pull out the sail is not altered. From a 94 year old perspective every >>>> ounce is an item. For you young bucks the extra force needed to pull >>>> out the genoa with either Mikes or Rogers ingenious tension techniques >>>> would hardly be measurable so a small price to pay. Besides who sails >>>> at 94. >>>> >>>> And Don, if you are listening, I have no recollection of your inquiring >>>> about a rub rail insert replacement. We have those in stock for Boston >>>> Whaler owners since their boats came with red and we are the only ones >>>> who also have that color. But the reflective tape idea sound >>>> interesting? >>>> >>>> On 5/24/20 8:34 PM, Olivier Hecht wrote: >>>> > Hi Stan! It almost looked like that extra piece was glassed in...if >>>> not >>>> > than definitely glued down well. I think I’d damage the hull >>>> interface just >>>> > by removing it. I’m thinking about just enlarging the inner opening >>>> with a >>>> > keyhole saw to allow me to pull the board. I don’t think the slick >>>> surface >>>> > on the laminate gives the gasket the best matings surface >>>> either...that >>>> > might explain my slightly wet bilge. Do you sell new diamond boards, >>>> or is >>>> > it usually more economical to have them repaired locally? >>>> > >>>> > On Sun, May 24, 2020 at 8:17 PM stan <stan at generalboats.com> wrote: >>>> > >>>> >> Mary Lou, >>>> >> >>>> >> since this is between me and you I am happy to join in to report >>>> what my >>>> >> now occasionally lying eyes are seeing. >>>> >> >>>> >> A prior owner, as is usually the case when someone reports on a >>>> >> ridiculous design fault attributed to GB, sacrificed access to the >>>> cb in >>>> >> the cb trunk in favor of a quick improper fix. >>>> >> >>>> >> The only recourse now for removing the cb is to take off the white >>>> >> whatever it is, throw it away. lift out the cb. Fix what has to be >>>> >> fixed. AND THEN REASSEMBLE THE ENTIRE CB SYSTEM AS GOD AND GB >>>> DESIGNED >>>> >> IT TO BE. >>>> >> >>>> >> >>>> >> On 5/24/20 7:17 PM, Mary Lou Troy wrote: >>>> >>> Hi Olivier, >>>> >>> >>>> >>> The laminate is not standard R22 construction. >>>> >>> >>>> >>> At one point we were going to do something to the board, I forget >>>> >>> what, maybe replace the pennant or get rid of the pully in the >>>> raising >>>> >>> system and had ordered a new gasket from Stan. When we got it apart >>>> >>> and discovered the laminate, we abandoned the project. We asked Stan >>>> >>> about it and via email he basically shrugged his shoulders and said >>>> >>> something to the effect that "that wasn't our repair." It wasn't >>>> >>> leaking, we found another way to do what we were going to do and >>>> >>> forgot about it. In fact I didn't realize I still had the exchange >>>> >>> with Stan in an old email program until now. >>>> >>> >>>> >>> After a bit of back and forth on a photo, Stan's exact words on the >>>> >>> subject from 2003 were: >>>> >>> >>>> >>> "So what I am seeing is a fiberglass "washer" between the top lip of >>>> >>> the trunk and >>>> >>> neoprene gasket. The question then is was there any leakage between >>>> >>> the fiberglass >>>> >>> gasket and the cb trunk lip? If no then I would leave it in place >>>> and >>>> >>> just use a >>>> >>> jib saw to cut on opening in it to match the opening in the cb >>>> trunk - >>>> >>> it should >>>> >>> cut easily since it is probably not very thick If on the other hand >>>> >>> there was >>>> >>> leakage between this element and the cb trunk cap I would do >>>> whatever >>>> >>> is necessary >>>> >>> to pull it off and throw it away and sand smooth the top of the >>>> trunk >>>> >>> lip to >>>> >>> receive the neoprene gasket." >>>> >>> >>>> >>> As I noted above, it wasn't leaking so my recollection is we decided >>>> >>> not to mess with it. >>>> >>> >>>> >>> Sorry this isn't more help. >>>> >>> >>>> >>> Mary Lou >>>> >>> >>>> >>> >>>> >>> On 5/24/2020 6:12 PM, Olivier Hecht wrote: >>>> >>>> My last message with two pics bounced back...hopefully this goes >>>> >>>> through... >>>> >>>> >>>> >>>> Whoops...sorry. Forgot to attach it! Here they are. That white >>>> piece is >>>> >>>> glued to the boat...I’m sure of it. >>>> >>>> >>>> >>>> >>>> >>>> On Sun, May 24, 2020 at 6:02 PM Richard Beytagh < >>>> rbeytagh at gmail.com> >>>> >>>> wrote: >>>> >>>> >>>> >>>>> The pic didn’t come through? >>>> >>>>> >>>> >>>>> On Sun, May 24, 2020 at 5:58 PM Olivier Hecht <oehecht at gmail.com> >>>> >>>>> wrote: >>>> >>>>> >>>> >>>>>> Well the board fell onto the trailer axle since I guess I pulled >>>> >>>>>> the boat >>>> >>>>>> too far forward. Took a chunk out of it so I decided to try to >>>> pull >>>> >>>>>> it. I >>>> >>>>>> just got the cap off after removing ~60 10mm bolts with blind >>>> nuts and >>>> >>>>> now >>>> >>>>>> I can’t access the pivot to remove the board. See pics...the >>>> white >>>> >>>>>> piece >>>> >>>>> of >>>> >>>>>> laminate? seems to be glasses into the hull. I’m afraid to >>>> destroy >>>> >>>>>> it by >>>> >>>>>> prying. Can anyone confirm to me that this piece should be >>>> >>>>>> removable? I >>>> >>>>>> cants see any other way to lift the board out since the pivot is >>>> >>>>>> inaccessible. I’ll be at the boat for an hour more max, then I >>>> have to >>>> >>>>> head >>>> >>>>>> home. Was really hoping to take the board with me! >>>> >>>>>> >>>> >>>>> -- >>>> >>>>> >>>> >>>>> >>>> >>>>> ~~~ _/) ~~~ >>>> >>>>> >>>> >>>>> Richard Beytagh >>>> >>>>> Phone: 828 337 0180 >>>> >>>>> >>>> >>>> -------------- next part -------------- >>>> >>>> A non-text attachment was scrubbed... >>>> >>>> Name: IMG_3661.jpg >>>> >>>> Type: image/jpg >>>> >>>> Size: 2852710 bytes >>>> >>>> Desc: not available >>>> >>>> URL: >>>> >>>> < >>>> >> >>>> http://rhodes22.org/pipermail/rhodes22-list/attachments/20200524/1a8b1c27/attachment.jpg >>>> >>> >>>> >>> >>>> >> >>>> >>>>
To use your email application to send a messsage to the webmaster rather than this form, .
Your post is being sent... 