2020-06-01; 18:48:10 EDT
Member Since
2002-08-01
Posts: 1438
Peter, As I was saying before, there is no such thing as square or level or plumb on a boat. No matter what you referenced to “level” the hull on the jack stands, there is no guarantee that “level” has anything to do with the centerline of the transom. Therefore, if I were considering relocating the gudgeons, I would use the transom centerline as a reference. Roger Pihlaja S/V Dynamic Equilibrium Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10 From: Peter Nyberg<mailto:peter at sunnybeeches.com> Sent: Monday, June 1, 2020 4:31 PM To: The Rhodes 22 Email List<mailto:rhodes22-list at rhodes22.org> Subject: Re: [Rhodes22-list] Rudder Askew Roger, Sorry to be slow to respond, but my new drone (Mavic Mini) arrived yesterday, so I’ve been a bit distracted. Also, it’s a busy time of year in the vegetable garden. None the less, I did manage to measure and find a center point near the top of the transom, and then estimate a line connecting this point to the center point at the bottom of the transom. I say ‘estimate’, because transitioning this line over the rub rail required some eye-balling. The center-to-center line diverges to starboard of the line that is vertical from the bottom center of the transom according to my level. At the upper gudgeon, the divergence is just under 1/8”. I’m not sure what to do with this information. —PeterSee the original archive post