< prior
Back to Month
Go to Thread
2020-06-02; 06:02:27 EDT
Member Since
2018-09-18
Posts: 52
Thanks Graham.See the original archive post
On Tue, Jun 2, 2020 at 12:02 AM Graham Stewart <gstewart8 at cogeco.ca> wrote: > The pieces of hose should be long enough to fill the slot between the > centerboard pin and the cap. Use regular hose that is relatively soft and > flexible as one of the purposes of the pieces is to absorb the shock should > the centerboard be forced up. > > Graham Stewart > gstewart8 at cogeco.ca > > > -----Original Message----- > From: Rhodes22-list [mailto:rhodes22-list-bounces at rhodes22.org] On Behalf > Of Olivier Hecht > Sent: Monday, June 1, 2020 6:53 PM > To: The Rhodes 22 Email List > Subject: Re: [Rhodes22-list] Emergency diamondboard help...at boatyard for > only a little while longer > > Richard, I didn’t see the picture come through. Are the hose pieces > “intact”, meaning I cut a few inches off of a hose but don’t have to split > it lengthwise or do anything else like that? > > On Mon, Jun 1, 2020 at 5:19 PM Michael D. Weisner <mweisner at ebsmed.com> > wrote: > > > Ric, > > > > I love the phrase " when the CB entered the cabin." > > > > Mike > > s/v Wind Lass ('91) > > Nissequogue River, NY > > I’d rather be sailing :~) > > > > > > -----Original Message----- > > From: Rhodes22-list <rhodes22-list-bounces at rhodes22.org> On Behalf Of > > Richard Stott > > Sent: Monday, June 1, 2020 4:40 PM > > To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org> > > Subject: Re: [Rhodes22-list] Emergency diamondboard help...at boatyard > for > > only a little while longer > > > > HI Todd > > I don’t have a Diamond board, I have the old style CB. > > Here are some pics of how it is rigged including the hose pieces. > > They can be anything, but do not make the diameter too big or they will > > impede the smoothness of the CB operation (on the old stye ) They do help > > quiet the banging noise, but they do not prevent it. > > I‘ve taken my CB part 3 times now for various reasons. > > I don’t want to do that any more. > > Most recently, I installed a new cap after I destroyed the previous one > > when the CB entered the cabin. > > Boating is a sure bet that something will happen the you never, ever > > expected. > > More on that coming soon. > > Ric > > Dadventure > > > > > > Richard Stott, AIA, LEED AP > > www.stottarchitecture.com > > Office 631-283-1777 > > Cell 516-965-3164 > > > > > > > > > > > > > On Jun 1, 2020, at 7:01 AM, Todd Tavares <tavares0947 at gmail.com> > wrote: > > > > > > Someone will surely post pictures, but they drop down into the slots on > > > either side of the centerboard, on top of the pin. > > > > > > Todd T. > > > > > > tavares0947 at gmail.com > > > > > > On Mon, Jun 1, 2020, 6:13 AM Olivier Hecht <oehecht at gmail.com> wrote: > > > > > >> Anyone have pictures of how the “scrap hose pieces” fit around the > > >> diamondboard? > > >> > > >> On Sat, May 30, 2020 at 2:19 PM Olivier Hecht <oehecht at gmail.com> > > wrote: > > >> > > >>> I was also not shocked to not find the “two scraps of garden hose” > I’ve > > >>> heard so much about. I think they dampen noise and movement near the > > >> pivot > > >>> of the board, and my board does “rattle” while sailing whenever it’s > > not > > >>> fully loaded. Does anyone have pictures of how/where those pieces of > > hose > > >>> should go when I reassemble everything? Thanks again! > > >>> > > >>> On Sat, May 30, 2020 at 11:51 AM Olivier Hecht <oehecht at gmail.com> > > >> wrote: > > >>> > > >>>> Got the board pulled today and the local yard should be able to > repair > > >> it > > >>>> this week. Here is a picture in case anyone is curious about the > > layers > > >> of > > >>>> construction. > > >>>> > > >>>> > > >>>> > > >>>> On Mon, May 25, 2020 at 12:00 PM Olivier Hecht <oehecht at gmail.com> > > >> wrote: > > >>>> > > >>>>> Thanks Stan. I already have two of those three upgrades and love > them > > >>>>> but have been thinking about a new tiller at some point! > > >>>>> > > >>>>> On Mon, May 25, 2020 at 11:02 AM stan <stan at generalboats.com> > wrote: > > >>>>> > > >>>>>> > > >>>>>> Oliver, > > >>>>>> > > >>>>>> www.rhodes22parts.com has parts for the Rhodes that are not > > available > > >>>>>> from marine suppliers. In the case of your diamond board however > I > > do > > >>>>>> think that it would be less costly if you have your current one > > >>>>>> repaired > > >>>>>> locally. Freight alone for a centerboard can be an item. With > all > > >>>>>> that > > >>>>>> saving how about a new style outhaul car or a fabulous fiberglass > > >>>>>> tiller > > >>>>>> or the new invention traveler system. > > >>>>>> > > >>>>>> While you got me to my keyboard, a comment. Every action has an > > equal > > >>>>>> and opposite reaction. Every recycled and new Rhodes has a yoke > that > > >>>>>> prevents the genoa line from leaving its drum so the energy needed > > to > > >>>>>> pull out the sail is not altered. From a 94 year old perspective > > >> every > > >>>>>> ounce is an item. For you young bucks the extra force needed to > > pull > > >>>>>> out the genoa with either Mikes or Rogers ingenious tension > > techniques > > >>>>>> would hardly be measurable so a small price to pay. Besides who > > sails > > >>>>>> at 94. > > >>>>>> > > >>>>>> And Don, if you are listening, I have no recollection of your > > >> inquiring > > >>>>>> about a rub rail insert replacement. We have those in stock for > > Boston > > >>>>>> Whaler owners since their boats came with red and we are the only > > ones > > >>>>>> who also have that color. But the reflective tape idea sound > > >>>>>> interesting? > > >>>>>> > > >>>>>> On 5/24/20 8:34 PM, Olivier Hecht wrote: > > >>>>>>> Hi Stan! It almost looked like that extra piece was glassed > > in...if > > >>>>>> not > > >>>>>>> than definitely glued down well. I think I’d damage the hull > > >>>>>> interface just > > >>>>>>> by removing it. I’m thinking about just enlarging the inner > opening > > >>>>>> with a > > >>>>>>> keyhole saw to allow me to pull the board. I don’t think the > slick > > >>>>>> surface > > >>>>>>> on the laminate gives the gasket the best matings surface > > >>>>>> either...that > > >>>>>>> might explain my slightly wet bilge. Do you sell new diamond > > boards, > > >>>>>> or is > > >>>>>>> it usually more economical to have them repaired locally? > > >>>>>>> > > >>>>>>> On Sun, May 24, 2020 at 8:17 PM stan <stan at generalboats.com> > > wrote: > > >>>>>>> > > >>>>>>>> Mary Lou, > > >>>>>>>> > > >>>>>>>> since this is between me and you I am happy to join in to report > > >>>>>> what my > > >>>>>>>> now occasionally lying eyes are seeing. > > >>>>>>>> > > >>>>>>>> A prior owner, as is usually the case when someone reports on a > > >>>>>>>> ridiculous design fault attributed to GB, sacrificed access to > the > > >>>>>> cb in > > >>>>>>>> the cb trunk in favor of a quick improper fix. > > >>>>>>>> > > >>>>>>>> The only recourse now for removing the cb is to take off the > white > > >>>>>>>> whatever it is, throw it away. lift out the cb. Fix what has to > be > > >>>>>>>> fixed. AND THEN REASSEMBLE THE ENTIRE CB SYSTEM AS GOD AND GB > > >>>>>> DESIGNED > > >>>>>>>> IT TO BE. > > >>>>>>>> > > >>>>>>>> > > >>>>>>>> On 5/24/20 7:17 PM, Mary Lou Troy wrote: > > >>>>>>>>> Hi Olivier, > > >>>>>>>>> > > >>>>>>>>> The laminate is not standard R22 construction. > > >>>>>>>>> > > >>>>>>>>> At one point we were going to do something to the board, I > forget > > >>>>>>>>> what, maybe replace the pennant or get rid of the pully in the > > >>>>>> raising > > >>>>>>>>> system and had ordered a new gasket from Stan. When we got it > > >> apart > > >>>>>>>>> and discovered the laminate, we abandoned the project. We asked > > >> Stan > > >>>>>>>>> about it and via email he basically shrugged his shoulders and > > >> said > > >>>>>>>>> something to the effect that "that wasn't our repair." It > wasn't > > >>>>>>>>> leaking, we found another way to do what we were going to do > and > > >>>>>>>>> forgot about it. In fact I didn't realize I still had the > > exchange > > >>>>>>>>> with Stan in an old email program until now. > > >>>>>>>>> > > >>>>>>>>> After a bit of back and forth on a photo, Stan's exact words on > > >> the > > >>>>>>>>> subject from 2003 were: > > >>>>>>>>> > > >>>>>>>>> "So what I am seeing is a fiberglass "washer" between the top > lip > > >> of > > >>>>>>>>> the trunk and > > >>>>>>>>> neoprene gasket. The question then is was there any leakage > > >> between > > >>>>>>>>> the fiberglass > > >>>>>>>>> gasket and the cb trunk lip? If no then I would leave it in > > place > > >>>>>> and > > >>>>>>>>> just use a > > >>>>>>>>> jib saw to cut on opening in it to match the opening in the cb > > >>>>>> trunk - > > >>>>>>>>> it should > > >>>>>>>>> cut easily since it is probably not very thick If on the other > > >> hand > > >>>>>>>>> there was > > >>>>>>>>> leakage between this element and the cb trunk cap I would do > > >>>>>> whatever > > >>>>>>>>> is necessary > > >>>>>>>>> to pull it off and throw it away and sand smooth the top of the > > >>>>>> trunk > > >>>>>>>>> lip to > > >>>>>>>>> receive the neoprene gasket." > > >>>>>>>>> > > >>>>>>>>> As I noted above, it wasn't leaking so my recollection is we > > >> decided > > >>>>>>>>> not to mess with it. > > >>>>>>>>> > > >>>>>>>>> Sorry this isn't more help. > > >>>>>>>>> > > >>>>>>>>> Mary Lou > > >>>>>>>>> > > >>>>>>>>> > > >>>>>>>>> On 5/24/2020 6:12 PM, Olivier Hecht wrote: > > >>>>>>>>>> My last message with two pics bounced back...hopefully this > goes > > >>>>>>>>>> through... > > >>>>>>>>>> > > >>>>>>>>>> Whoops...sorry. Forgot to attach it! Here they are. That > white > > >>>>>> piece is > > >>>>>>>>>> glued to the boat...I’m sure of it. > > >>>>>>>>>> > > >>>>>>>>>> > > >>>>>>>>>> On Sun, May 24, 2020 at 6:02 PM Richard Beytagh < > > >>>>>> rbeytagh at gmail.com> > > >>>>>>>>>> wrote: > > >>>>>>>>>> > > >>>>>>>>>>> The pic didn’t come through? > > >>>>>>>>>>> > > >>>>>>>>>>> On Sun, May 24, 2020 at 5:58 PM Olivier Hecht < > > >> oehecht at gmail.com> > > >>>>>>>>>>> wrote: > > >>>>>>>>>>> > > >>>>>>>>>>>> Well the board fell onto the trailer axle since I guess I > > >> pulled > > >>>>>>>>>>>> the boat > > >>>>>>>>>>>> too far forward. Took a chunk out of it so I decided to try > to > > >>>>>> pull > > >>>>>>>>>>>> it. I > > >>>>>>>>>>>> just got the cap off after removing ~60 10mm bolts with > blind > > >>>>>> nuts and > > >>>>>>>>>>> now > > >>>>>>>>>>>> I can’t access the pivot to remove the board. See pics...the > > >>>>>> white > > >>>>>>>>>>>> piece > > >>>>>>>>>>> of > > >>>>>>>>>>>> laminate? seems to be glasses into the hull. I’m afraid to > > >>>>>> destroy > > >>>>>>>>>>>> it by > > >>>>>>>>>>>> prying. Can anyone confirm to me that this piece should be > > >>>>>>>>>>>> removable? I > > >>>>>>>>>>>> cants see any other way to lift the board out since the > pivot > > >> is > > >>>>>>>>>>>> inaccessible. I’ll be at the boat for an hour more max, > then I > > >>>>>> have to > > >>>>>>>>>>> head > > >>>>>>>>>>>> home. Was really hoping to take the board with me! > > >>>>>>>>>>>> > > >>>>>>>>>>> -- > > >>>>>>>>>>> > > >>>>>>>>>>> > > >>>>>>>>>>> ~~~ _/) ~~~ > > >>>>>>>>>>> > > >>>>>>>>>>> Richard Beytagh > > >>>>>>>>>>> Phone: 828 337 0180 > > >>>>>>>>>>> > > >>>>>>>>>> -------------- next part -------------- > > >>>>>>>>>> A non-text attachment was scrubbed... > > >>>>>>>>>> Name: IMG_3661.jpg > > >>>>>>>>>> Type: image/jpg > > >>>>>>>>>> Size: 2852710 bytes > > >>>>>>>>>> Desc: not available > > >>>>>>>>>> URL: > > >>>>>>>>>> < > > >>>>>>>> > > >>>>>> > > >> > > > http://rhodes22.org/pipermail/rhodes22-list/attachments/20200524/1a8b1c27/attachment.jpg > > >>>>>>>>> > > >>>>>>>>> > > >>>>>>>> > > >>>>>> > > >>>>>> > > >> -------------- next part -------------- > > >> A non-text attachment was scrubbed... > > >> Name: IMG_3700.jpg > > >> Type: image/jpeg > > >> Size: 2017697 bytes > > >> Desc: not available > > >> URL: < > > >> > > > http://rhodes22.org/pipermail/rhodes22-list/attachments/20200601/3d760085/attachment.jpg > > >>> > > >> > > > > > >
To use your email application to send a messsage to the webmaster rather than this form, .
Your post is being sent... 