The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

ROGER PIHLAJA



Rudder-Engine Conflicts

2020-06-10; 13:15:47 EDT

Member Since

2002-08-01

Posts: 1438

Allyn,

Mary Lou Troy is correct.  The rudder blade needs to be all the way down in order to clear the prop.  However, your boat might have another issue.  Your motor mount might be installed too far inboard.  Or, your rudder might have been installed off the transom centerline to port; but, that seems very unlikely.  Try this: Measure the distance from the rudder’s gudgeon centerline to the centerline of the outboard motor mount.  It’s pouring cat & dogs right now, so I can’t go make that measurement on S/V Dynamic Equilibrium.  But, when the rain lets up, I will go make that measurement and let you know what I find.

Roger Pihlaja
S/V Dynamic Equilibrium

Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10

From: Mary Lou Troy<mailto:mtroy at atlanticbb.net>
Sent: Wednesday, June 10, 2020 9:27 AM
To: The Rhodes 22 Email List<mailto:rhodes22-list at rhodes22.org>
Subject: Re: [Rhodes22-list] Rudder-Engine Conflicts

Is your rudder pulled all the way forward with the control line on the
front edge of the rudder? It sails better with it pulled forward too.

Ours was close after we bought a new motor with a larger low-thrust prop
but the rudder never came in contact with the prop. Hopefully someone
else has had and solved the issue.

Mary Lou

See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting