2020-06-21; 20:45:58 EDT
Member Since
2019-06-04
Posts: 463
I am getting ready for a road trip to a larger lake with a couple of friends. I will sleep on the settee and they will sleep in the cockpit. Last winter I cut some plywood planks to fit between the benches to make a wide and flat sleeping area. Since bugs could be a problem, I got a big piece of mosquito netting. I anchored out for the first time last night so I could try things out. I draped the mosquito netting over the bimini, and put the entrances where it joins to the cabin and also at the rear of the boat. I used nylon clamps to secure the netting to the bimini straps, around the tiller, and to join with the pop top enclosure, where I left the entrance rolled up. This forms a very large bug free area and it worked out well. Last night was very calm so it may be necessary to take additional steps to secure the netting if it is windy. Before trying this I found some old posts in the archive, but no photos and more ideas than actual experience. However, I'm guessing that some of you may have solved this in similar (and perhaps better) ways. It doesn't provide the protection and privacy of a boom room, but for a dry night this is a cheap and easy solution that pairs nicely with the pop top enclosure. If there is rain, we'll have a big tarp as well to toss over the boom and provide rain cover. Feel free to chime in with your solutions since it's always interesting to see the creativity of the group. Netting: https://www.amazon.com/gp/product/B01KKMZRFK/ Clamps: https://www.amazon.com/WORKPRO-16-Piece-Spring-Muslin-Backdrops/dp/B0109K8F3O Jesse Shumaker S/V Zephyr CockpitNetting03.JPG CockpitNetting01.JPG CockpitNetting02.JPG CockpitNetting04.JPGSee the original archive post