The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

Graham Stewart



Need some help fixing my stupidity

2020-07-01; 22:50:26 EDT

Member Since

2005-04-29

Posts: 814

Rob:

This might be a totally irrelevant to your situation but when I was
repainting my transom I wanted to remove the motor lift. It is just the old
manual lift. I removed all of the bolts but the bracket was stuck to the
transom so firmly I could not remove it without damaging the fiberglass. I
concluded that the bracket had been installed with a high adhesive sealant
like 5200. Removing 5200 generally requires either a grinder or dynamite and
neither alternative appealed to me. 

After a search for solutions on the internet I came across a product called
DeBond. You are instructed to score the edge of the joint, apply DeBond and
after a few minutes the joint can be separated without damage to the
fiberglass.

I bought the stuff and applied it to the join, waited a few minutes and
.....nothing. I repeated the process but the bracket would not budge. I
decided that the product was just hype and decided to somehow paint with the
bracket installed. As it turned out I got involved in other projects and let
the matter stall. Several months later I noticed that the bracket had fallen
off the transom under it own weight - which being cast aluminum wasn't much.
I have no idea how long it had been on the ground before I noticed.

The point of all this is to say that Debond works but might take a while and
you need to be very very patient. The second point is that because it worked
it seems likely that something like 5200 was used to affix the bracket.

That is my experience - for what it is worth.

Graham Stewart
Agile, Rodes 22, 1976
Kingston Ontario
See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting