The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

Graham Stewart



Need some help fixing my stupidity

2020-07-04; 19:08:48 EDT

Member Since

2005-04-29

Posts: 814

Rob:
If you are so inclined, other than matching the gel coat color that does not
look to me to be a difficult fix. Examine it carefully and put pressure in
the area to determine if the damage extends beyond the visible crack. Can
you see the crack from the inside? The fact that you have access to both
sides also makes it much easier. 

I would reinforce the inside with a few layers of cloth and then grind out
the crack with an 8:1 taper. Fill the depression with about 4 layers of
cloth with each patch being about an inch larger on all sides than the
previous one and finally fill and fair with filler. I use epoxy for
everything but I am sure that polyester would be more than adequate.

The final step is to match the color with either gel coat or paint. That
requires skill that far exceeds my ability. That is why I ended up painting
the whole damned boat. So if you can't stan the idea of a blemish you will
probably need a pro.

Graham Stewart
Agile, Rodes 22, 1976
Kingston Ontario


See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting