< prior
Back to Month
Go to Thread
2020-07-10; 20:29:38 EDT
Member Since
2004-04-05
Posts: 2060
Thanks for sharing your adventure with us. I enjoyed the tale and lesson too! Bottle jack, don’t leave home without it.See the original archive post
On Fri, 10 Jul 2020 at 16:40, Jesse Shumaker <jesse.laten.shumaker at gmail.com> wrote: > Last weekend, a couple of friends and I took my Rhodes 22 to Rathbun Lake > in Iowa. It's about 10 times as large as Lake Manawa, where I normally > sail. Preparation and getting there turned out to be more of an adventure > than expected. The week before the trip, I realized the brake line on the > trailer had rusted through and had to be replaced. Fortunately, one of the > guys going on the trip is a mechanic and took care of that. We tested out > the brakes on the trailer the night before leaving, which resulted in a > broken bunk. I saw that right before we were going to load the boat on the > trailer. Much better to have that happen without a boat on it! We > replaced the bunk, got a spare bunk for the other side (more on that later) > and loaded up the boat. For the first time, I used the mast lowering > system on the water and that worked well. > > I picked up a bottle jack and jack stand just before we left the next day. > An hour into the trip, the driver side tire on the trailer blew. We > quickly pulled over since the tire was completely shredded and the trailer > was resting on the rim since this is just a single axle trailer. > Fortunately the rim was not damaged. The tires were 8 ply from 2017. They > made the trip from Florida to Iowa a year ago with no problem but appeared > to have developed flat spots from sitting over the winter. The shredded > tire took out a minor side light on the trailer and knocked off a trailer > guide bar on that side. I'm lucky it was not more serious. Anyway, after > putting on the spare and getting back underway, I found a tire shop a few > miles away so I went ahead and got all new Power King 10 ply tires. They > got us in right away and it was only $100 a tire installed, so I'm probably > lucky the blowout happened close to that shop. The trailer runs smoother > on the new tires. > > Upon arrival, we were moved to a larger slip than we had reserved since > that is where they had availability. Instead of the small boats for > company, we were the tiny boat in these slips. Imagine my surprise to see > sailboats up to 40' in Iowa. Some of these bigger boats seem to be used > more as floating condos with a mast rather than getting out and sailing. > > There was a ramp right next to the slip that we were assigned and we saw a > couple of powerboats launch and retrieve there, so we figured we would use > that ramp. We got the mast up on land and proceeded to back down the steep > ramp with the trailer extension in use. After we were fully off the > trailer, the truck couldn't get back up the ramp. Uh oh. It turns out we > backed off the end of the ramp. Fortunately, we had taken the new spare > bunk with us and had removed it from where it was strapped to the trailer > just before launching. We used that as a giant lever placed under the > frame in front of the wheels to pop up the trailer and then the truck was > able to pull the trailer out. Whew! We later learned that we used the > high water ramp (the water was not high). Unfortunately there was not > signage to identify it as the high water ramp and there was no mention of > this by the staff. Oh well, we came out unscathed other than feeling > embarrassed. > > I was also surprised to see two R22s at Rathbun: one from 1976 (which had > been recently for sale) and a 2000. Unfortunately, I did not see the > owners there. It would have been nice to meet another Rhodie in person. > > The knot meter read 22NM after a full day of sailing on Friday which is the > furthest that I've gone on my boat in a day. We anchored out on Friday and > Saturday night. We used the Fortress FX7 anchor that came with the boat on > the first night and on the second night we used a 13lb Mantus M2 that I > recently bought. In time I'll be following up with some questions on > anchoring now that I've got a chance to try out a few things. I've read > the anchoring threads in the archives but I'm really curious to see how > Peter's new anchoring setup (described at https://youtu.be/VeL_3Ir0yQ4) is > working out in practice. > > I slept in the cabin on the extended settee and my friends each slept on > top of cockpit cushions on a bench. I had made cockpit filler planks but > they were content to each sleep on a bench. It wasn't buggy and we didn't > even end up using the netting or pop-top on the second night anchoring. > > Returning was a lot easier. We used the normal ramp to retrieve and didn't > have any problem. I waded out to check the water depth first to be on the > safe side. Mast lowering and raising was easier since we all had been > through the processes together a few days earlier. Trailering was > uneventful on the way back. My trailer is at the trailer shop for a few > minor repairs to make sure it's ready for the next adventure. > > I definitely learned some lessons about trailering, ramps, and got used to > camping on the boat for a few days with a couple of friends. > > My friends (both are automotive guys) recommended taking weight off the > tires by using some jack stands when the boat is on the trailer for the > winter. Does anyone else do this? > > I attached a photo from the anchorage on the last morning before leaving. > -------------- next part -------------- > A non-text attachment was scrubbed... > Name: RathbunMorning.JPG > Type: image/jpeg > Size: 86798 bytes > Desc: not available > URL: < > http://rhodes22.org/pipermail/rhodes22-list/attachments/20200710/4db4c915/attachment.jpe > > >
To use your email application to send a messsage to the webmaster rather than this form, .
Your post is being sent... 