How to: A Trouble-free Furling Main | Sail Magazine
2020-07-19;
22:30:32 EDT
Member Since
2018-03-19
Posts: 105
That's a really good looking sail Jay. Looking at the photo, I'm curious
about a couple things. First, did you have a Doyle before having the
Evolution made for your boat? And can you tell a noticable difference with
the extra batten?
Michael Riter
SV Emma B
On Sun, Jul 19, 2020 at 5:42 PM Jay Friedland <jayf401 at gmail.com> wrote:
> Hi, Tom,
> I opted to work with Evolution Sails in 2014, may be still in Easton, MD.,
> Scott Gibbs was the contact. They were good to work with, and the design
> was unique for our boat, straight leech, and 2 vertical battens, 1/4” round
> fiberglass rods, roughly at thirds, see attached photo, if it doesn’t get
> stripped away.
>> Although I had some tweaks (more cosmetic than design- extended UV cover,
> tack line, R22 numbers, etc.) in the beginning, it’s performed flawlessly,
> especially this past year with Stan’s new outhaul car. I went through 2
> previous outhaul car designs over the last 6 years, which made it a little
> difficult to reef and furl in. The angle of the boom is critical to it’s
> compactness in the mast, and it’s original stiffness took a few weeks to
> settle in.
>> Over the battenless version, I reef & furl on a port tack, although it goes
> right in when in irons or light winds (6-8 kts.) on starboard tack. It’s
> about the same size and was the same cost as the Doyle version, and about
> the same area UV cover. It is much stiffer than the single batten. If you
> ever in the Ocean County, NJ /Long Beach Island area, I go out at least 3-4
> times a week, now with masks, so a test sail is always available.
>> Jay Friedland
> S/V Wanderlust, ‘97
>>>>>>> On Jul 19, 2020, at 4:30 PM, Jesse Shumaker <
>jesse.laten.shumaker at gmail.com>
> wrote:
>> Hi Tom,
>> The R22 IMF furls in the opposite direction as the illustration depicting
> the Selden furling shown in the article. There is a vertical batten that
> is inserted into the UV resistant portion of the sail, which is the thick
> colored section that sticks out when the sail is fully furled. Forgoing
> battens on the rest of the main seems to the price you pay in terms of
> performance in exchange for the big benefits in terms of ease of using
> IMF. Horizontal battens are reserved for mains that hoist in the
> traditional manner, or perhaps they could also be used on boom roller
> furling, which seems to be less common than IMF. I've not heard of anyone
> else adding additional vertical battens and I'm not sure the mast would be
> large enough to accommodate the extra size of a furled sail including
> vertical battens.
>> I haven't yet sailed on a larger boat with IMF, but people who have used
> those and then come on my R22 seem to be surprised about the ability to
> raise and lower the entire system (boom and mainsail) with the pin going
> through the gooseneck to the mast. I suppose that's not an option on a
> larger boat because of the extra weight. It is nice to have a high boom
> normally for plenty of room in the cockpit and to catch the most wind up
> high, but then be able to lower it quickly in stronger conditions.
> Lowering the center of effort reduces heeling.
>> Maybe Chris G. could provide some perspectives on IMF for the R22 vs. a
> larger boat since he also has a Catalina 38(?) with IMF.
>> Jesse Shumaker
> S/V Zephyr
>> On Sun, Jul 19, 2020 at 2:39 PM Tom Van Heule <
>tom.vanheule at intrinsicprograms.com> wrote:
>> Hi, I came across this article today - and was searching in the archives
> for any details - lots of talk on the IMF, but nothing explaining the
> system (that I have found!). Aside, Is anyone using battens? vertical or
> horizontal? Is the GBI system similar/different from the Selden
> description?
>https://www.sailmagazine.com/diy/how-to-a-trouble-free-furling-main>> It was a nice read to hear some support for IMF in either case.
>>> --
> Tom Van Heule
> Intrinsic Programs
>tom.vanheule at intrinsicprograms.com> +1 303 525 5266
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: R22.Vertical Battens.2017-10-04.jpg
> Type: image/jpeg
> Size: 2333129 bytes
> Desc: not available
> URL: <
>http://rhodes22.org/pipermail/rhodes22-list/attachments/20200719/7ed8ab90/attachment.jpg> >
>
×
Message to Webmaster:
To use your email application to send a messsage to the webmaster rather than this form,
.