2020-07-21; 20:20:05 EDT
Member Since
2019-06-20
Posts: 100
I saw in the archives where someone put a retaining bar across under the seats going into a hole in a HDPE block at one end and dropping into a slot in a HDPE block at the other end. This looks like it requires the bar to be lifted out of the slot and removed to access under the seats. I played around with an idea which seems to work really well. I made a slotted track which attaches to the fore and aft bulkheads under each seat. To access under the seat, I simply lift the bar up into a notch at the top of each track getting it totally out of the way for access. Then release the bar from the notches and it slides down the track to act as a retaining bar. I used a 1” thick 12x12 piece of HDPE cut into 4 strips 2 7/8” wide. The height from the cockpit floor to the seat bottom is more on the aft bulkhead, so that track is longer so when the bar is lowered it is an even 4 1/2” above the floor front to back. The forward bulkhead has a slope which required a spacer block to keep the same distance top to bottom between the tracks. I originally screwed the tracks vertically, but decided to angle them about 20 degrees to allow a little more storage space. Everything was done with a 1” wood bit and ripping the slots with a table saw. I used a 7/8” aluminum tube for the bar. The tracks did require a 1/4” HDPE backing plate since there is a gap at the top of the bulkheads. George Morgan SV “Knotty Lady” 1986 The first images show the tracks before installation. 40A4DF44-408B-48BE-9078-D584C5E77BB9.jpeg 97CC11B6-4797-44A2-9CA2-AE4F622AC40B.jpeg This image is a forward track mounted with the required spacer block. The tracks later got angled. C23EC821-449B-4FF5-936C-2EEDEE82AA7C.jpeg These two images are with the bar raised and resting in the notches. E3BC1E3F-2E5C-49E4-8BCE-FC5684DF7ADF.jpeg D4D6AE0E-45FB-49A0-B03C-DFF6BB6DB503.jpeg These two images are with the bar lowered. CB7E944F-7F92-4930-BF8E-E18416537242.jpeg B39572B1-2851-453E-BB2C-D55F0054AAEF.jpeg -- Sent from: http://rhodes-22.1065344.n5.nabble.com/See the original archive post