The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

ROGER PIHLAJA



Repair of Spider Cracks at Mast Step Tabernacle

2020-07-28; 11:30:48 EDT

Member Since

2002-08-01

Posts: 1438

I would also be concerned about water penetration into the end grain, causing rot.  Also, the type of wood found in typical hardware store dowels will probably rot pretty quickly in a damp environment.

Roger Pihlaja
S/V Dynamic Equilibrium

Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10

From: Mike Riter<mailto:mike at traildesign.com>
Sent: Tuesday, July 28, 2020 10:55 AM
To: The Rhodes 22 Email List<mailto:rhodes22-list at rhodes22.org>
Subject: Re: [Rhodes22-list] Repair of Spider Cracks at Mast Step Tabernacle

On paper the dowels are a great idea. In practice I think it may be
problematic. The screws originally went through the plywood core under the
fiberglass, the grain of the wood is oriented at right angles to the screw
threads giving them good holding power. Putting the screws into the end of
a dowel puts the threads along the grain and reduces the holding power by
at least half. If you use the dowels, then definitely use longer screws to
make up some of the lost holding power

I'm not an engineer, but in my business we build a lot of bridges and
boardwalks. I've learned (through failure) that anytime we are screwing
into the end of a board, we have to use much longer screws to ensure
floodwater forces won't tear the end caps off.
My .02

Michael Riter
SV Emma B



See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting