2020-08-05; 08:53:58 EDT
Member Since
2019-10-09
Posts: 120
I enjoy reading all of the opinions and advice offered on this list. Here are a few thoughts related to a recent set of threads. It seems I have a talent for making posts that get zero responses - let's see if that trend continues! I've used epoxy on a variety of boats over the years. When doing a total renovation on a 28' Pearson Triton, the cost of epoxy was getting up there. I did some research and tried some sources other than West Systems. I settled on using RAKA epoxy (http://www.raka.com/epoxy.html) for a few reasons. It is lower viscosity than West (granted, I haven't used West in years) making it easier to wet out fiberglass cloth and to saturate wood core; it is simpler to measure since it's two parts resin to one part hardener; it is less expensive than West. RAKA also sells a variety of epoxy types and additives. I also recall a phone conversation when I was ordering where the owner asked about my project so he could help me buy what I needed. I just thought it was good for people to know that there are alternatives. Regarding filling a hole with a reduced-strength epoxy mixture, you might try some of the additives that are used to make it easier to sand hardened epoxy. Two that come to mind are microballoons and glass bubbles. You could also add wood flour which I think would also reduce the strength of the epoxy. Wood flour is much finer than sawdust (which might also work). If you have a sander with an attached collection bag, you'll have wood flour if you sand hardwood with something like a 150 or 220 grit. Hope that helps! Mark -- Boston, MA 2000 R22 *Luna Mia* 1987 Nimble 30 *For Sale* 1982 Com-Pac 16 *For Sale*See the original archive post