The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

Luis Guzman



Reconnecting the Tabernacle Screws Following Sacrificial Failure

2020-08-05; 19:44:45 EDT

Member Since

2004-12-08

Posts: 328

What I have done in the past is pack the hole with wood sticks ( kind of like huge tooth picks ) saturated in wood glue, packed in there tight. After everything is dry, cut the sticks level with the surface, grind the top with a dremel so you have like a 1/8 of an inch deep hole. Fill with epoxy, and when the epoxy dries up, you can drill the holes for the screws. Use some silicone when setting the base screws to keep everything dry there.LuisS/V AquetxaliSent from my T-Mobile 4G LTE Device
See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting