2020-08-20; 14:33:24 EDT
Member Since
2002-09-10
Posts: 976
I suggest you re-do the terminal fitting on the wire coming from the battery feeding the stud terminal in the laz. Check for corrosion between the strands. Look for dark brown dusty colored wire strands too. This should be pre-tinned boat wire though. This may not be the problem but its cheap and gives you a chance to see if there's anything going on under the insulation. The act of manipulating and bending the ends of the wires could be causing enough internal motion that its cleaning the strand surfaces where they contact each other just enough to freshen the internal contact. Just a thought. Todd T. tavares0947 at gmail.comSee the original archive post