The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

Jesse Shumaker



CB Pennant drain

2020-08-21; 23:08:04 EDT

Member Since

2019-06-04

Posts: 463

Hi Mark, somehow I missed your reply from before.  I removed the wood
covering and it looks like mine has a single hose which is pretty straight
forward so I think I'll leave that in place and just thread the new line
through.  See the attached photo for the setup on my boat.

What is the length of the CB pennant line that you used?  I'll be
attempting the CB pennant replacement a week from tomorrow by attaching the
new line to the old line and pulling the new line through.  I'll be untying
(or cutting off) the old line underwater (using SCUBA gear) and tying on
the new line with a bowline.  I think I'll need to first secure the
diamondboard with a line from the stern and perhaps with another line
around the beam as well so that when I remove the old pennant, the
diamondboard doesn't continue to pivot any further and drop all the way
down to vertical.  When I'm at my slip, the diamondboard bottom should only
be about 18" off the bottom when extended so I could use a bucket to prop
it up as well.  I'm still thinking through my options...



CBpennantDrainHose.jpg
See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting