Try putting nuts on the turnbuckle threads. Tighten the nuts to the turnbuckle. Left hand and right hand nuts as you know. 15-20 years No
problems.
Sent from my iPhone
> On Aug 30, 2020, at 9:21 PM, Tom Van Heule <tom.vanheule at intrinsicprograms.com> wrote:
>> ?All good. At least we all know what fun is!!
>> This is ...
>>>> On Sun, Aug 30, 2020, 8:39 PM Jesse Shumaker <jesse.laten.shumaker at gmail.com>
>> wrote:
>>>> Tom, thanks for clarifying. I had misunderstood. I can understand the
>> need for efficiency if you are stepping the mast for each sail. I only do
>> that a few times a season so I'm not so fast :)
>>>> Jesse Shumaker
>> S/V Zephyr
>>>> On Sun, Aug 30, 2020, 7:46 PM Tom Van Heule <
>>tom.vanheule at intrinsicprograms.com> wrote:
>>>>> Jesse,
>>> These are good suggestion around solving turnbuckles walking. The guys
>> are
>>> looking at the splitting ring < like a keychain ring but not absolute
>> ahit>
>>> that hold the pin in the tunrbuckle and chainstay. You'd better have
>> good
>>> finger nails, or patience, or both... Don't drop one. Lol
>>>>>> I have to mast up Everytime I sail, I'd love to use a few sets of good
>> snap
>>> pins / quick pins on the two sets of cabin stays. It would save ¹?
>> minutes
>>> in setup and teardown.
>>>>>> I am also interested in a quick release stay system for those of us in
>>> trailer situations.
>>>>>> Tom
>>>>>> On Sun, Aug 30, 2020, 7:37 PM Jesse Shumaker <
>>>jesse.laten.shumaker at gmail.com>
>>> wrote:
>>>>>>> I use velcro wrap pins to lock my turnbuckles. The prior owner had
>> done
>>>> that as well but the velcro had worn out over time from being in the
>>>> elements. I ordered replacements: C.SHERMAN JOHNSON brand model
>>> WRAPC2-P.
>>>> I put PVC pipe over my turnbuckles to avoid chafe on the sails and I
>>> think
>>>> it will also help with the longevity of the velcro wrap pins.
>>>>https://www.amazon.com/gp/product/B07GC4BPQJ>>>>>>>> Jesse Shumaker
>>>> S/V Zephyr
>>>>>>>> On Sat, Aug 29, 2020 at 9:18 AM JeffSmith <jeffsmithphoto at gmail.com>
>>>> wrote:
>>>>>>>>> I hate using split rings or "safety pins" to secure clevis pins!
>>>>> Has anyone had real life experience with:
>>>>>>>>>> SUNCOR QUICK LOCK PIN 1/4" X 1/2" 316 S/S
>> SCR-S0375-0715
>>>>> QUICK LOCK PIN
>>>>> 1/4" X 1/2" 316 S/S 173204 In Stock 15.29
>>>>>>>>>> These are from Hamilton Marine.
>>>>> WLL shear load is 4,600 lbs, which should be more than adequate and
>> as
>>>> long
>>>>> as the clevis pin holder hole is not enlarged, should be secure.
>>>>>>>>>> I figure that with the redundancy of stays on the R22, one failure
>>> would
>>>>> not
>>>>> be catastrophic.
>>>>> Pricey for 10 of them, but worth it in frustration abatement.
>>>>>>>>>>>>>>>>>>>>>>>>> -----
>>>>> Jeff Smith
>>>>> 2009 R22 #101 RADIANT
>>>>> Atlantic Highlands Municpal Harbor
>>>>> Atlantic Highlands, NJ
>>>>>>>>>> --
>>>>> Sent from: http://rhodes-22.1065344.n5.nabble.com/>>>>>>>>>>>>>>
×
Message to Webmaster:
To use your email application to send a messsage to the webmaster rather than this form,
.