The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

ROGER PIHLAJA



Replacing jib furler line

2020-09-02; 13:57:21 EDT

Member Since

2002-08-01

Posts: 1438

Hi Boyces,

I don’t have that brand of roller furler.  But, from the photo, it looks the top plate is attached with a couple of screws and comes off, thus enabling access to the inside of the drum.  Then, I imagine the furling line just passes thru the hole in the drum and is secured with a stopper knot inside the drum.

Roger Pihlaja
S/V Dynamic Equilibrium

Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10

From: CPBoyce<mailto:cp.boyce at comcast.net>
Sent: Wednesday, September 2, 2020 1:11 PM
To: rhodes22-list at rhodes22.org<mailto:rhodes22-list at rhodes22.org>
Subject: Re: [Rhodes22-list] Replacing jib furler line

Another photo. The line enters into the furler through one small opening and
I assume ties off inside. Anyone know how to gain access to the inside to
tie it off? The aluminim drum is attached with two screw, on on each side of
the drum.



-----
The Boyces
s/v Take Five (aka the Electric Rhodes)
--
Sent from: http://rhodes-22.1065344.n5.nabble.com/

See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting