The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

cjlowe at sssnet.com



Testing the positive flotation

2020-09-08; 10:06:54 EDT

Member Since

2008-02-18

Posts: 319

Todd,
What you see is pretty much what I reused. To be fair, forward and aft of
the repair area is solid, I'd guess epoxy sand lead mix. The lead looked
to be scrap from battery manufacturing.1/16" thick, 3/4" wide and anywhere
from 1/4 to 6" long. My bilge has always been a little damp, entering
above the waterline. At one time it might have all been solid, but NY and
Ohio winter freeze and thaw cycles broke it up, would be my guess. The
four inch PVC pipe was there, but four years ago I dug out all the loose
ballast and put that 1.5" PVC pipe in to be able to use a turkey baster to
remove excess moisture.
  Jerry



Jerry,
See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting