< prior
Back to Month
Go to Thread
2020-09-11; 08:42:44 EDT
Member Since
2019-06-04
Posts: 463
Thanks for the tips. I may give the step bit a try.See the original archive post
On Thu, Sep 10, 2020 at 9:44 PM Graham Stewart <gstewart8 at cogeco.ca> wrote: > I like to use a step bit to gradually drill a larger hole in metal without > having to change bits. > > Graham Stewart > Agile, Rodes 22, 1976 > Kingston Ontario > > > -----Original Message----- > From: Rhodes22-list [mailto:rhodes22-list-bounces at rhodes22.org] On Behalf > Of Peter Nyberg > Sent: Thursday, September 10, 2020 8:59 PM > To: The Rhodes 22 Email List > Subject: Re: [Rhodes22-list] Pop Top Connection > > Starting with smaller holes and gradually expanding to larger holes is the > approach I usually take. I don’t know that it actually matters. > > Using a drill press may help to positions holes more accurately, other > than that, I haven’t noticed that it matters much over using a hand drill. > > —Peter > > > On Sep 10, 2020, at 6:48 PM, Jesse Shumaker < > jesse.laten.shumaker at gmail.com> wrote: > > > > I can confirm what Peter mentioned since I recently ordered mast > organizer > > model DH288 > > < > https://www.dwyermast.com/items.asp?cat1ID=40&cat1Name=Hardware&familyID=19&familyName=Halyard+Organizer+Plates > > > > in > > preparation for fall projects. I attached a photo of the one that I > > received in the mail. Sorry for the poor lighting in the photo. It > occurs > > to me that I'll need to drill holes to fit the existing pattern on the > > tabernacle. It appears I may want to use a drill press and > progressively > > larger bits for that given the strength of the material described in > > Roger's earlier post in this thread. > > > > Jesse Shumaker > > S/V Zephyr > > > > > > > > On Thu, Sep 10, 2020 at 10:56 AM Peter Nyberg <peter at sunnybeeches.com> > > wrote: > > > >> I avoided having to cut off the tab by mounting the organizer backwards, > >> with the tab on the forward side. I don’t use the tab, but it’s not in > the > >> way there. > >> > >> The halyard organizer, for those who might be interested, came from > Dwyer ( > >> www.dwyermast.com). I just took a look at their current selection of > >> organizers, and none appear to have a tab with a hole for mounting a > block > >> at the centerline; only port and starboard. > >> > >> Peter Nyberg > >> Coventry, CT > >> s/v Silverheels (1988/2016) > >> > >>> On Sep 10, 2020, at 10:40 AM, ROGER PIHLAJA <roger_pihlaja at msn.com> > >> wrote: > >>> > >>> Graham, > >>> > >>> I actually have a modified version of Peter Nyberg’s mast step > >> organizer. I simply cut off the tab on the aft side so it wouldn’t > >> interfere with the pop top slider. Unfortunately, the 300 series > stainless > >> alloys have a strong tendency to work harden when they are cold > worked. It > >> takes a good metal cutting band saw with plenty of coolant to cut thru > the > >> work hardened bent tab. Then, a bench grinder and fine emory cloth will > >> clean up the cut and round off the sharp edges. Having the anchor > points > >> on the port, starboard, and front sides of the mast is very handy. > >>> > >>> Roger Pihlaja > >>> S/V Dynamic Equilibrium > >>> > >>> Sent from my iPhone > >>> > >>>> On Sep 10, 2020, at 10:21 AM, Graham Stewart <gstewart8 at cogeco.ca> > >> wrote: > >>>> > >>>> ?Roger: Thanks for the thorough response. It all makes sense. I wonder > >> why I didn't have that ring installed on my boat. A second option I am > >> considering is to install a mast step organizer such as the one that > Peter > >> Nyberg installed on his boat. I don't have a Cunningham on my boat. I > would > >> be interested in seeing what others have installed if anyone has > pictures. > >>>> > >>>> Graham Stewart > >>>> Agile, Rodes 22, 1976 > >>>> Kingston Ontario > >>>> > >>>> > >>>> -----Original Message----- > >>>> From: Rhodes22-list [mailto:rhodes22-list-bounces at rhodes22.org] On > >> Behalf Of ROGER PIHLAJA > >>>> Sent: Thursday, September 10, 2020 8:15 AM > >>>> To: The Rhodes 22 Email List > >>>> Subject: Re: [Rhodes22-list] Pop Top Connection > >>>> > >>>> Graham, > >>>> > >>>> Although, at first glance, the present pop top slider design may look > >> sort of crude, it’s actually pretty elegant. Remember, there are 2 > pieces > >> of tackle that have their lower anchor points on the pop top slider, the > >> boom vang and the Cunningham. The snap shackle for the Cunningham > actually > >> attaches to the eye strap and the snap shackle for the boom vang > actually > >> attaches to the ring. This way, the force from the Cunningham, which is > >> vertical directly up the mast, is kept as close as possible to the mast. > >> The force from the Cunningham on the two machine screws attaching the > eye > >> strap to the pop top slider is almost entirely shear, which is the most > >> mechanically efficient way to load a threaded connection. In addition, > by > >> attaching the Cunningham to the eye strap vs. the ring, the clam cleat > on > >> the block automatically faces aft, thus facilitating ease of use from > the > >> cockpit. Similarly, attaching the snap shackle for the boom vang onto > the > >> ring vs. the eye strap, automatically positions the clam cleat downward > and > >> moves it aft slightly, both of which help prevent the two pieces of > tackle > >> from getting fouled up on each other and makes the boom vang easier to > use > >> from the cockpit. > >>>> > >>>> If the ring were simply welded onto the pop top slider, I think it > >> might interfere with the pop top raising and lowering process. i.e. > When > >> the pop top is raised, the 1st step is to raise the aft end of the pop > top > >> up on its support arms until the spring loaded detents lock into > position. > >> In this position, the front corner of the pop top might interfere with a > >> fixed welded ring on the pop top slider. The present design, with its > eye > >> strap and ring, automatically folds down out of the way. Even with the > >> present pop top slider design, it’s not the eye strap and ring that’s in > >> the way if you attempt to raise the pop top with the boom vang and > >> Cunningham in place, it’s the two pieces of tackle and all the > associated > >> line. Similarly, it’s not the eye strap and ring that tend to chip up > the > >> front corner of the pop top, it’s the lower blocks and snap shackles on > the > >> Cunningham and boom vang that do the damage when they start flopping > >> around. A welded fixed ring wouldn’t change that. > >>>> > >>>> Finally, if the ring is welded onto the pop top slider; then, that > will > >> be a critical weld. There will be a lot of force on it. I hope you > are, > >> or have access to, a certified welder. > >>>> > >>>> Even after all these years, it’s fun to critically exam Stan’s ideas > >> and designs that were so multifunctional. He was way ahead of us all in > >> anticipating and solving problems. My boat is in its 44th season and > it’s > >> been sailed hard. The pop top slider hasn’t given a bit of trouble. > >>>> > >>>> Roger Pihlaja > >>>> S/V Dynamic Equilibrium > >>>> > >>>> > >>>> Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for > >> Windows 10 > >>>> > >>>> From: Graham Stewart<mailto:gstewart8 at cogeco.ca> > >>>> Sent: Wednesday, September 9, 2020 10:32 PM > >>>> To: 'The Rhodes 22 Email List'<mailto:rhodes22-list at rhodes22.org> > >>>> Subject: Re: [Rhodes22-list] Pop Top Connection > >>>> > >>>> Roger: > >>>> I am thinking that it might be worth getting the ring welded to the > >> plate at about a 30 degree an angle rather than having it flop around in > >> the strap eye. Do you see a reason why that might not work? > >>>> > >>>> Graham Stewart > >>>> gstewart8 at cogeco.ca > >>>> > >>>> > >>>> -----Original Message----- > >>>> From: Rhodes22-list [mailto:rhodes22-list-bounces at rhodes22.org] On > >> Behalf Of ROGER PIHLAJA > >>>> Sent: Wednesday, September 9, 2020 5:24 PM > >>>> To: The Rhodes 22 Email List > >>>> Subject: Re: [Rhodes22-list] Pop Top Connection > >>>> > >>>> Graham, > >>>> > >>>> The slider is held in its various positions by a hair pin clip that > >> inserts thru holes drilled thru the mast track. I always keep the hair > pin > >> clip in place to hold the slider down no matter whether I have tension > on > >> the boom vang &/or Cunningham or not. S/V Dynamic Equilibrium came > rigged > >> with the boom vang and Cunningham downhaul when I purchased her. I > don’t > >> know if a previous owner drilled and tapped the pop top slider for the > eye > >> strap. Or, maybe back in 1976, Stan might have offered a “performance > >> mainsail package” that included a boom vang and Cunningham. There is > also > >> an eye strap drilled and tapped into the underside of the boom for the > top > >> anchor point on the boom vang. It all looks pretty professional if they > >> are homemade and they both serve their mainsail shaping functions > >> perfectly. Both the boom vang and Cunningham must be removed to raise > the > >> pop top. With snap shackles, installing and removing them is not a big > >> deal. A word of caution, all this hardware on the leading edge of the > pop > >> top can chip the fiberglass if they get to banging around. I solved > this > >> problem by epoxying 10 gage SS sheet metal to the sides and the top of > the > >> pop top near the pointy end where it attaches to the pop top slider. > >>>> > >>>> Roger Pihlaja > >>>> S/V Dynamic Equilibrium > >>>> > >>>> Sent from my iPhone > >>>> > >>>>> On Sep 9, 2020, at 4:13 PM, Graham Stewart <gstewart8 at cogeco.ca> > >> wrote: > >>>>> > >>>>> ?Roger: > >>>>> My 76 has the same bracket except that it does not have the ring or > eye > >>>>> strap. I wonder if that was added by a previous owner. Do you have a > >> track > >>>>> stop to keep the pop top down when the boom vang or Cunningham is in > >> use? If > >>>>> it works well I might copy that. > >>>>> > >>>>> Graham Stewart > >>>>> Agile, Rodes 22, 1976 > >>>>> Kingston Ontario > >>>>> > >>>>> > >>>>> -----Original Message----- > >>>>> From: Rhodes22-list [mailto:rhodes22-list-bounces at rhodes22.org] On > >> Behalf Of > >>>>> ROGER PIHLAJA > >>>>> Sent: Wednesday, September 9, 2020 1:32 PM > >>>>> To: John Carlson; The Rhodes 22 Email List > >>>>> Subject: Re: [Rhodes22-list] Pop Top Connection > >>>>> > >>>>> Hi All, > >>>>> > >>>>> I've attached a picture of the pop top slider connection on my older > >> (1976) > >>>>> standard (i.e. non IMF) mainsail Rhodes 22. As you can see, it's a > >> simple > >>>>> weldment. The bent sheet metal slides up and down in the mast slot. > >> The > >>>>> bolt attaches to a pair of brackets on the leading edge of the pop > >> top. The > >>>>> ring is the lower anchor point for the boom vang and Cunningham > >> downhaul > >>>>> tackle. > >>>>> > >>>>> [cid:image003.jpg at 01D686AD.A5678F20] > >>>>> > >>>>> Roger Pihlaja > >>>>> S/V Dynamic Equilibrium > >>>>> > >>>>> Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for > >> Windows > >>>>> 10 > >>>>> > >>>>> From: John Carlson via Rhodes22-list<mailto: > rhodes22-list at rhodes22.org > >>> > >>>>> Sent: Wednesday, September 9, 2020 10:36 AM > >>>>> To: The Rhodes 22 Email List<mailto:rhodes22-list at rhodes22.org> > >>>>> Subject: Re: [Rhodes22-list] Pop top connection > >>>>> > >>>>> The front of mine is quite rough as well. I have a picture, but it > >> looks a > >>>>> lot like yours (and I use a Mac). > >>>>> > >>>>> > >>>>> -- > >>>>> John. > >>>>> 2004/12 Rhodes 22 > >>>>> Waco, TX > >>>>> > >>>>> > >>>>> > >>>>>>>>> On Sep 9, 2020, at 9:26 AM, Mark Whipple <mark at whipplefamily.com > > > >> wrote: > >>>>>> New question: I'm looking at the piece that connects my pop-top to > the > >>>>>> mast, and it looks unfinished on the forward end, like it may have > >> been > >>>>>> broken at some point. I realize there are many small differences > >> between > >>>>>> our boats but do yours look like this? (Sorry for the blue tape in > >> the way > >>>>>> - I removed it but then forgot to take another picture.) > >>>>>> Mark > >>>>>> -- > >>>>>> Boston, MA > >>>>>> 2000 R22 *Luna Mia* > >>>>>> 1987 Nimble 30 *For Sale* > >>>>>> 1982 Com-Pac 16 *For Sale* > >>>>>> -------------- next part -------------- > >>>>>> A non-text attachment was scrubbed... > >>>>>> Name: luna mia popup connection.jpg > >>>>>> Type: image/jpeg > >>>>>> Size: 24318 bytes > >>>>>> Desc: not available > >>>>>> URL: > >>>>> < > >> > http://rhodes22.org/pipermail/rhodes22-list/attachments/20200909/b8bc1259/a > >>>>> ttachment.jpg> > >>>>> > >>>>> -------------- next part -------------- > >>>>> A non-text attachment was scrubbed... > >>>>> Name: 5D89362A40A344E489D4186D51FBAF96.jpg > >>>>> Type: image/jpeg > >>>>> Size: 153447 bytes > >>>>> Desc: 5D89362A40A344E489D4186D51FBAF96.jpg > >>>>> URL: > >>>>> < > >> > http://rhodes22.org/pipermail/rhodes22-list/attachments/20200909/b8512c08/a > >>>>> ttachment.jpg> > >>>> > >>>> > >> > >> > > -------------- next part -------------- > > A non-text attachment was scrubbed... > > Name: DH288.JPG > > Type: image/jpeg > > Size: 73235 bytes > > Desc: not available > > URL: < > http://rhodes22.org/pipermail/rhodes22-list/attachments/20200910/70648fa1/attachment.jpe > > > > >
To use your email application to send a messsage to the webmaster rather than this form, .
Your post is being sent... 