The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

ROGER PIHLAJA



Almost perfect as can be - trailer

2020-09-15; 09:48:27 EDT

Member Since

2002-08-01

Posts: 1438

Graham,

I just measured my tongue weight at 343 lbs using a digital bathroom scale under the tongue jack.

Remember, if you build some sort of bracket for your outboard on the tongue and stow it up there, you will get a much greater increase on tongue weight vs. just removing the motor from the transom.  Just this one change would get you pretty close to where you should be.

Roger Pihlaja
S/V Dynamic Equilibrium

Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10

From: Graham Stewart<mailto:gstewart8 at cogeco.ca>
Sent: Tuesday, September 15, 2020 9:41 AM
To: 'The Rhodes 22 Email List'<mailto:rhodes22-list at rhodes22.org>
Subject: Re: [Rhodes22-list] Almost perfect as can be - trailer

Roger:
I am going to remove the motor and check the tongue weight again to see what
the difference is. I am thinking that the standard old Rhodes 22, motor and
trailer would weigh about 3200 lbs so the tongue weight should be at least
320 lbs - which seems like a lot to me.

If anyone knows their tongue weight it might be helpful to me and others if
they post it to da list.

Graham Stewart
gstewart8 at cogeco.ca

See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting