< prior
Back to Month
Go to Thread
2020-09-26; 18:39:44 EDT
Member Since
2020-07-08
Posts: 278
Thanks bill, thanks Matt. I see a lot of solace in the post you posted. We'll try to keep it in mind. And I'll need to get some cupholders it seems. It is the only time I have heard of condoning an r22 gybe however. Most all other posts say never, as does the manual. Cheers all,See the original archive post
On Sat, Sep 26, 2020, 4:59 PM Matt Berman <matt at mattmail.net> wrote: > I found this interesting piece in the Archives from 2004. I don't have the > captain's chairs, alas, it's a 1986, but otherwise seems worth a try: > > The Rhodes 22 is a completely unique boat with a set of features not > available on any other boat. If these features are right for you, you will > be thrilled with the boat. Because the boat is truly unique, many of the > "tips" "pointers" "warnings" and "rules" you may have read elsewhere simply > don't apply. > > There is no trick to coming about with the 175 on a Rhodes -22. Most > people simply release it too early. > > You are sitting in the captain's seat on the high side of the boat. (Get > the captain's seats.) > > On the previous tack you have led the jib sheet around the winch on the > low side, where the jib is deployed, and then once around the winch on the > high side, and then into the clam cleat. The line goes straight across the > cockpit. > > Let us say you are sitting on the port side, in your captain's seat. You > have the hiking stick for your tiller in your right hand. You have a drink > in your left hand. Your left arm is on the padding on the stern rail which > functions like the arm of an extremely comfortable arm chair. Your feet > are splayed out on top of the cockpit seats. Music is playing on your > stereo. For some reason you decide to tack. > > Push the tiller toward the sail. > > Now you must make a momentous decision. Will you switch captain's seats > after you tack? If so, you should place your drink in the cup holder on > the starboard stern rail--which will force you to get out of your captain's > seat on the port side. If not, you may remain seated while you place your > drink in the cup holder on the port stern rail. Failure to anticipate this > question can leave you in a captain's seat with your drink on the other > side of the boat! This is the trickiest part of the maneuver. > > At some point you will notice that the boom has moved from the starboard > side to the port side of the boat. It moved gently across, and did not hit > your head. There was no drama. There was no pandemonium. > > You will also notice that the huge belly of the 175 jib, still firmly > cleated, has sagged across the boat, and you can see it is helping to pull > the bow about, even before the boom switches sides. > > If you sheeted the jib too tightly around the shrouds, the 175 won't help > you come about. Slowly loosen the sheet (remember it is cleated right > below your drinking hand, and you may have to put your drink down--see > above for caution.) Wait for the boat to come about. > > Please note, you do not fully release the jib until after the boat has > come about. The boat is now sailing with the main full, and the jib > fighting to deploy fully on the other side of the boat. Slowly release the > jib on what is now the high side, and pull in the line on what is now the > low side. If you decided to stay in your original captain's chair, you are > still sitting in it, with all of the lines and controls within reach for > this and every subsequent tack. If not, you must wrap the jib sheet around > the winch on what is now the low side, and feed it to the winch and cleat > on what will be the high side where you will be sitting. > > In either case, both jib lines are in your hands. You release one in a > controlled manner, and pull the other. The jib does not drag across the > foredeck, and it does not hang up on the shrouds. (I don't have rollers or > covers on any shrouds.) It behaves more like a kite over which you have > complete control, as it floats over the foredeck from one side to the other. > > After you've done this a few times, it starts to look like everything is > happening at once. But it isn't. Never release the jib until after the > boom has gone across and the main is full, and you will never miss a tack. > Don't let the jib sheet go all at once or you will not be able to pull in > the jib sheet on the other side quickly enough, and it will get wet. > > If this fails to work, there are only 2 possible reasons: either there is > too little or too much wind. But not to worry. Nothing is lost. Pull the > hiking stick toward you, and away from the sails. Release the jib sheet, > and furl the jib! (Maintain tension on the jib line so the line wraps > around the roller furler drum properly.) Pull in the main sheet as far as > it will go. Gibe! (or Gybe! or Jibe! or Jybe!--I'm never sure which one it > is.) > > This always works, and will always enable you to come about. The boat is > strongly built, and this will not hurt either the rigging or the sails. > The boom will travel a short distance from one side to the other with a > loud "pop". Release the sheet on the main, and redeploy both the main and > the jib on the correct side. > > The 175 should never, ever become fouled on the foredeck or on the > shrouds. If it does, chalk it up to operator error. > > A lot of words, but a simple procedure that always works. > > Always remember Stan's words: "This is a sailboat. Let the wind do the > work" > > Bill Effros > > Thanks, > > --Matt > > > > > On Sep 26, 2020, at 5:45 PM, Peter Nyberg <peter at sunnybeeches.com> > wrote: > > > > Matt, > > > > Welcome to the Rhodes 22 family. > > > > I used to have a 175% genoa, and had this problem to some extent. > > > > You mention stanchions and lifelines. My boat doesn’t have these, and I > think I’m on safe ground saying that most Rhodes 22’s don’t. You could > consider getting rid of them. > > > > As to shrouds, putting a length of PVC pipe over the turnbuckles and a > couple of feet of wire will reduce the likelihood of a hang-up there. > > > > Also, the ‘proper’ way to rig the jib sheets is to use a single line for > both port and starboard, attached to the genoa clew with a ‘larks head’ or > ‘cow hitch’ knot. > > > > This season I switched from the 175% genoa to a 135%. I did this for > other reasons, but it does seem that the smaller headsail is much less > likely to get hung up when tacking. > > > > Peter Nyberg > > Coventry, CT > > s/v Silverheels (1988/2016) > > > >> On Sep 26, 2020, at 4:52 PM, Matt Berman <matt at mattmail.net> wrote: > >> > >> Hi, all, > >> > >> I've been sailing for most of my life, but only just got a Rhodes 22 > this week. I went for my first sail today, light breeze, and encountered a > number of things that are different from other boats I have sailed. Here's > the first: > >> > >> Every time I came about, the genoa (170) hung up on everything it could > find -- stanchions, lifelines, shrouds. This was not a minor, momentary > clip -- it stayed hung up until each time I had to crawl forward and > release the genoa by hand, not fun when you're single-handing. > >> > >> I made sure the sheets were all on the outside of everything, and that > the sheet on the opposite side was loose and free, and I wasn't standing on > it (more about that in another post). I tried jiggling both sides, and > sawing both sheets back and forth to try to release it, but no go. > >> > >> Is there some trick or technique you use on a Rhodes to get the genoa > to move smoothly from one side to the other during a tack? I didn't even > try a jibe. > >> > >> Thanks, > >> > >> --Matt > >> > >> > >> > > > >
To use your email application to send a messsage to the webmaster rather than this form, .
Your post is being sent... 