> On Sep 27, 2020, at 11:22 PM, Gmorganflier <gmorgan.flier at gmail.com> wrote:
>> Welcome to the list Matt,
>> I’m a very novice sailer and the Rhodes 22 is my first sailboat. I’ve been
> out on her maybe 9 or 10 times. I have gotten better at getting the big
> genny to switch sides if the winds are at least around 3-4 mph. Less then
> that, I still have trouble unless I furl the sail in a bit.
>> I’ve experimented with different shroud guards and my latest rendition uses
> pvc...not schedule 40, but whatever the thinner version is. I use 1”
> diameter for the outer tube, 3/4” for the inner tube, a 3/4” cap and 1/4”
> pex up the shroud from there for maybe 5’. I drill a hole in the cap big
> enough to get the 1/4 pex through. To thread the shroud through the 1/4” pex
> and pvc cap you need to take the turnbuckle off so your only working with
> the shroud wire and it’s threaded end.
>> The 3/4” cap is almost the same diameter as the 1” pvc, but there is some
> slop with the 3/4” pvc moving around inside the 1” pvc. The remedy this I
> used 9 wraps of electrical tape to center the 3/4” inside the 1” and then I
> used sail tape around the joint between the cap and the 1” pvc.
>> The photo I’m attaching is a screen shot from a video I made this morning.
>> George Morgan
> S/V Knotty Lady 1986/2005
>> <http://rhodes-22.1065344.n5.nabble.com/file/t909/DE71CBA5-15A8-4CFD-9365-C9D9134D9460.png>
>>>> --
> Sent from: http://rhodes-22.1065344.n5.nabble.com/>
×
Message to Webmaster:
To use your email application to send a messsage to the webmaster rather than this form,
.