Gary,
Don't know if any of the attached of my former 1986 AT EASE will help.
Might need to enlarge. Seems like a variety of stops might work. Good
luck!
Lee
No Boat Yet
Claytor Lake, VA
Motor Lift Side.jpgMotor Lift Top.jpgMotor Lift Side Top.jpg
On Sat, Nov 14, 2020 at 10:16 AM Cary Tolbert <retiredtoby at gmail.com> wrote:
> I am asking for help with photos for an 86 Rhodes. My boat was
> apparently hit
> in the marina and I have a damaged motor mount. I was able to salvage most
> of the damaged parts and replicate them from existing patterns of the old
> parts.
> However, the LOWER STOPS were missing. So at this point I have no idea what
> I need to do to replicate these parts. Photos will be very helpful.
> Measurement would also be greatly appreciated. I am guessing any boat from
> an 82 to an 89 may have a very similar set up. Ric I am glad you can now
> send pictures with your computer. You mentioned that we have the same set
> up. What type of material did Stan use for the stops? Stan said, he no
> longer makes this type of mount and cannot furnish parts. So I must rely on
> your help and my modest skills to be able to sail next season.
> It must have been a lot of force on the collision as I found three 1/4
> inch stainless steel bolts bent to 90 degrees and one bolt was sheared into
> two pieces.
>> Thanks for your help,
> Cary Tolbert
> S/V Whisper "86
> Radford, VA
>
×
Message to Webmaster:
To use your email application to send a messsage to the webmaster rather than this form,
.