< prior
Back to Month
Go to Thread
2020-11-16; 09:48:04 EST
Member Since
2012-07-26
Posts: 198
Thanks Rob There is a good reason for asking questions. The more brains the better.See the original archive post
On Mon, Nov 16, 2020, 8:32 AM Lowe, Rob <rlowe at vt.edu> wrote: > Cary, > I don't believe grease on the tracks would be a good idea. Any grease > would attract and hold dirt, which will just add to the wear. I think a > spray lubricant such as Sailcoat would be the most you would want to use. - > Rob > > > ________________________________ > From: Rhodes22-list <rhodes22-list-bounces at rhodes22.org> on behalf of > Cary Tolbert <retiredtoby at gmail.com> > Sent: Saturday, November 14, 2020 4:07 PM > To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org> > Subject: Re: [Rhodes22-list] Help with motor mount > > Thanks Ric. You mentioned, from your survey, that we had the same mount. > The pictures would be really great. If you could give me the > dimensions that would put me in business. > > While I am at it, I have one more question for those on da List. Does > anyone have experience with silicone dielectric grease as lubricant on a > track. I am thinking of the rails of the motor lift. > Cary > Whisper > > On Sat, Nov 14, 2020 at 3:21 PM Ric Stott <ric at stottarchitecture.com> > wrote: > > > Cory > > The pics I see of the red boat has a motor mount a grade level up from > > mine. My aluminum rails are attached directly to the hull. There is a > > Delrin (I think) strip that runs on the inside of the channel, bottom to > > top. I took some pics and will send them out on Monday if I can. > > Ric > > Dadventure > > > > Sent from my iPhone > > > > > On Nov 14, 2020, at 11:38 AM, Lee Kuhn <lvjkuhn at gmail.com> wrote: > > > > > > ?The minute I get off the waiting list at your marina I'll pull the > > trigger > > > on getting a recycled one from Stan. > > > > > >> On Sat, Nov 14, 2020, 11:31 AM Cary Tolbert <retiredtoby at gmail.com> > > wrote: > > >> > > >> Thanks Lee. Your boat looks like it was upgraded in its life. That > > system > > >> is much newer and a better thought out system than the one on my 86. > > >> Rob's 90 something has something similar for his 9.9 hp with all > > electrical > > >> controls. > > >> Any luck on tracking down your Rhodes 22 to be? > > >> Cary > > >> > > >>> On Sat, Nov 14, 2020 at 11:18 AM Lee Kuhn <lvjkuhn at gmail.com> wrote: > > >>> > > >>> Gary, > > >>> > > >>> Don't know if any of the attached of my former 1986 AT EASE will > help. > > >>> Might need to enlarge. Seems like a variety of stops might work. > Good > > >>> luck! > > >>> > > >>> Lee > > >>> No Boat Yet > > >>> Claytor Lake, VA > > >>> > > >>> On Sat, Nov 14, 2020 at 10:16 AM Cary Tolbert <retiredtoby at gmail.com > > > > >>> wrote: > > >>> > > >>>> I am asking for help with photos for an 86 Rhodes. My boat was > > >>>> apparently hit > > >>>> in the marina and I have a damaged motor mount. I was able to > salvage > > >>> most > > >>>> of the damaged parts and replicate them from existing patterns of > the > > >> old > > >>>> parts. > > >>>> However, the LOWER STOPS were missing. So at this point I have no > idea > > >>> what > > >>>> I need to do to replicate these parts. Photos will be very helpful. > > >>>> Measurement would also be greatly appreciated. I am guessing any > boat > > >>> from > > >>>> an 82 to an 89 may have a very similar set up. Ric I am glad you > can > > >> now > > >>>> send pictures with your computer. You mentioned that we have the > same > > >> set > > >>>> up. What type of material did Stan use for the stops? Stan said, he > > no > > >>>> longer makes this type of mount and cannot furnish parts. So I must > > >> rely > > >>> on > > >>>> your help and my modest skills to be able to sail next season. > > >>>> It must have been a lot of force on the collision as I found three > > >> 1/4 > > >>>> inch stainless steel bolts bent to 90 degrees and one bolt was > sheared > > >>> into > > >>>> two pieces. > > >>>> > > >>>> Thanks for your help, > > >>>> Cary Tolbert > > >>>> S/V Whisper "86 > > >>>> Radford, VA > > >>>> > > >>> -------------- next part -------------- > > >>> A non-text attachment was scrubbed... > > >>> Name: Motor Lift Side.jpg > > >>> Type: image/jpeg > > >>> Size: 1770484 bytes > > >>> Desc: not available > > >>> URL: < > > >>> > > >> > > > http://rhodes22.org/pipermail/rhodes22-list/attachments/20201114/c7f75d52/attachment.jpg > > >>>> > > >>> -------------- next part -------------- > > >>> A non-text attachment was scrubbed... > > >>> Name: Motor Lift Top.jpg > > >>> Type: image/jpeg > > >>> Size: 1804873 bytes > > >>> Desc: not available > > >>> URL: < > > >>> > > >> > > > http://rhodes22.org/pipermail/rhodes22-list/attachments/20201114/c7f75d52/attachment-0001.jpg > > >>>> > > >>> -------------- next part -------------- > > >>> A non-text attachment was scrubbed... > > >>> Name: Motor Lift Side Top.jpg > > >>> Type: image/jpeg > > >>> Size: 1845462 bytes > > >>> Desc: not available > > >>> URL: < > > >>> > > >> > > > http://rhodes22.org/pipermail/rhodes22-list/attachments/20201114/c7f75d52/attachment-0002.jpg > > >>>> > > >>> > > >> > > >
To use your email application to send a messsage to the webmaster rather than this form, .
Your post is being sent... 