< prior
Back to Month
Go to Thread
2020-11-17; 09:06:21 EST
Member Since
2012-07-26
Posts: 198
Thanks Steven. It does look similar to my tracks. Less secure than I would have thought. Your track looks to be longer than my set up. Thanks again for the help. Cary S/V WhisperSee the original archive post
On Tue, Nov 17, 2020, 8:56 AM Steven Alm <stevenalm at gmail.com> wrote: > My boat is a 1990 but probably similar vintage motor lift. The stopper is > only on the starboard side track with is longer than the port side. It is > not through-bolted to the transom and just unscrews. The bolt is covered > with a plastic or composite bushing. > > On Mon, Nov 16, 2020 at 9:11 AM Richard Stott <ric at stottarchitecture.com> > wrote: > > > Nabble is a PITA > > Here are some pics. > > Westmarine mount is temporary. > > The GB 1-1/4" x 1-1/4" rails are 11 7/8” apart - out to out. > > My new rails will extend past the useless rub rail. > > But -They will not extend past the top of the transom. > > It will be manual. > > The stops are simple 1/4” aluminum bolts at the bottom of the rails. > > More to follow > > > > > > Richard Stott, AIA, LEED AP > > www.stottarchitecture.com > > Office 631-283-1777 > > Cell 516-965-3164 > > > > > > > > > > > > > On Nov 16, 2020, at 9:48 AM, Cary Tolbert <retiredtoby at gmail.com> > wrote: > > > > > > Thanks Rob > > > There is a good reason for asking questions. The more brains the > better. > > > > > > On Mon, Nov 16, 2020, 8:32 AM Lowe, Rob <rlowe at vt.edu> wrote: > > > > > >> Cary, > > >> I don't believe grease on the tracks would be a good idea. Any grease > > >> would attract and hold dirt, which will just add to the wear. I > think a > > >> spray lubricant such as Sailcoat would be the most you would want to > > use. - > > >> Rob > > >> > > >> > > >> ________________________________ > > >> From: Rhodes22-list <rhodes22-list-bounces at rhodes22.org> on behalf of > > >> Cary Tolbert <retiredtoby at gmail.com> > > >> Sent: Saturday, November 14, 2020 4:07 PM > > >> To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org> > > >> Subject: Re: [Rhodes22-list] Help with motor mount > > >> > > >> Thanks Ric. You mentioned, from your survey, that we had the same > mount. > > >> The pictures would be really great. If you could give me the > > >> dimensions that would put me in business. > > >> > > >> While I am at it, I have one more question for those on da List. Does > > >> anyone have experience with silicone dielectric grease as lubricant > on a > > >> track. I am thinking of the rails of the motor lift. > > >> Cary > > >> Whisper > > >> > > >> On Sat, Nov 14, 2020 at 3:21 PM Ric Stott <ric at stottarchitecture.com> > > >> wrote: > > >> > > >>> Cory > > >>> The pics I see of the red boat has a motor mount a grade level up > from > > >>> mine. My aluminum rails are attached directly to the hull. There is > a > > >>> Delrin (I think) strip that runs on the inside of the channel, bottom > > to > > >>> top. I took some pics and will send them out on Monday if I can. > > >>> Ric > > >>> Dadventure > > >>> > > >>> Sent from my iPhone > > >>> > > >>>> On Nov 14, 2020, at 11:38 AM, Lee Kuhn <lvjkuhn at gmail.com> wrote: > > >>>> > > >>>> ?The minute I get off the waiting list at your marina I'll pull the > > >>> trigger > > >>>> on getting a recycled one from Stan. > > >>>> > > >>>>> On Sat, Nov 14, 2020, 11:31 AM Cary Tolbert <retiredtoby at gmail.com > > > > >>> wrote: > > >>>>> > > >>>>> Thanks Lee. Your boat looks like it was upgraded in its life. That > > >>> system > > >>>>> is much newer and a better thought out system than the one on my > 86. > > >>>>> Rob's 90 something has something similar for his 9.9 hp with all > > >>> electrical > > >>>>> controls. > > >>>>> Any luck on tracking down your Rhodes 22 to be? > > >>>>> Cary > > >>>>> > > >>>>>> On Sat, Nov 14, 2020 at 11:18 AM Lee Kuhn <lvjkuhn at gmail.com> > > wrote: > > >>>>>> > > >>>>>> Gary, > > >>>>>> > > >>>>>> Don't know if any of the attached of my former 1986 AT EASE will > > >> help. > > >>>>>> Might need to enlarge. Seems like a variety of stops might work. > > >> Good > > >>>>>> luck! > > >>>>>> > > >>>>>> Lee > > >>>>>> No Boat Yet > > >>>>>> Claytor Lake, VA > > >>>>>> > > >>>>>> On Sat, Nov 14, 2020 at 10:16 AM Cary Tolbert < > > retiredtoby at gmail.com > > >>> > > >>>>>> wrote: > > >>>>>> > > >>>>>>> I am asking for help with photos for an 86 Rhodes. My boat was > > >>>>>>> apparently hit > > >>>>>>> in the marina and I have a damaged motor mount. I was able to > > >> salvage > > >>>>>> most > > >>>>>>> of the damaged parts and replicate them from existing patterns of > > >> the > > >>>>> old > > >>>>>>> parts. > > >>>>>>> However, the LOWER STOPS were missing. So at this point I have no > > >> idea > > >>>>>> what > > >>>>>>> I need to do to replicate these parts. Photos will be very > helpful. > > >>>>>>> Measurement would also be greatly appreciated. I am guessing any > > >> boat > > >>>>>> from > > >>>>>>> an 82 to an 89 may have a very similar set up. Ric I am glad you > > >> can > > >>>>> now > > >>>>>>> send pictures with your computer. You mentioned that we have the > > >> same > > >>>>> set > > >>>>>>> up. What type of material did Stan use for the stops? Stan said, > > he > > >>> no > > >>>>>>> longer makes this type of mount and cannot furnish parts. So I > must > > >>>>> rely > > >>>>>> on > > >>>>>>> your help and my modest skills to be able to sail next season. > > >>>>>>> It must have been a lot of force on the collision as I found > three > > >>>>> 1/4 > > >>>>>>> inch stainless steel bolts bent to 90 degrees and one bolt was > > >> sheared > > >>>>>> into > > >>>>>>> two pieces. > > >>>>>>> > > >>>>>>> Thanks for your help, > > >>>>>>> Cary Tolbert > > >>>>>>> S/V Whisper "86 > > >>>>>>> Radford, VA > > >>>>>>> > > >>>>>> -------------- next part -------------- > > >>>>>> A non-text attachment was scrubbed... > > >>>>>> Name: Motor Lift Side.jpg > > >>>>>> Type: image/jpeg > > >>>>>> Size: 1770484 bytes > > >>>>>> Desc: not available > > >>>>>> URL: < > > >>>>>> > > >>>>> > > >>> > > >> > > > http://rhodes22.org/pipermail/rhodes22-list/attachments/20201114/c7f75d52/attachment.jpg > > >>>>>>> > > >>>>>> -------------- next part -------------- > > >>>>>> A non-text attachment was scrubbed... > > >>>>>> Name: Motor Lift Top.jpg > > >>>>>> Type: image/jpeg > > >>>>>> Size: 1804873 bytes > > >>>>>> Desc: not available > > >>>>>> URL: < > > >>>>>> > > >>>>> > > >>> > > >> > > > http://rhodes22.org/pipermail/rhodes22-list/attachments/20201114/c7f75d52/attachment-0001.jpg > > >>>>>>> > > >>>>>> -------------- next part -------------- > > >>>>>> A non-text attachment was scrubbed... > > >>>>>> Name: Motor Lift Side Top.jpg > > >>>>>> Type: image/jpeg > > >>>>>> Size: 1845462 bytes > > >>>>>> Desc: not available > > >>>>>> URL: < > > >>>>>> > > >>>>> > > >>> > > >> > > > http://rhodes22.org/pipermail/rhodes22-list/attachments/20201114/c7f75d52/attachment-0002.jpg > > >>>>>>> > > >>>>>> > > >>>>> > > >>> > > >> > > > > > -------------- next part -------------- > A non-text attachment was scrubbed... > Name: IMG_0648.jpg > Type: image/jpg > Size: 1942916 bytes > Desc: not available > URL: < > http://rhodes22.org/pipermail/rhodes22-list/attachments/20201117/5e697346/attachment.jpg > > >
To use your email application to send a messsage to the webmaster rather than this form, .
Your post is being sent... 