The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

Ric Stott



Installing a bulkhead compass

2020-12-21; 18:00:40 EST

Member Since

2013-07-01

Posts: 436

The bulkhead is actually 2 pieces about 2 “ apart, and hollow in the middle..
I mounted mine high on the bulkhead and near the companionway, so its mostly not obscured by passengers in the cockpit. 
I used the same one and ran the night lighting wires in between the two layers downward. 
This is not a difficult process. 
I used a battery powered saber saw with a long blade
That compass comes with a back this is perfect for the procedure. 
Once you have the location, go ahead and drill a small hole for the saber saw blade with the outside radius of the smll hole on your pencil line from the template.  
The space between the two layers is accessible from the cabin, so the wires can be fed through. 
Good luck 
Ric 
Dadventure 

Richard Stott, AIA, LEED AP 
www.stottarchitecture.com
Office	631-283-1777
Cell		516-965-3164 





See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting