The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

joedempsey



Portlight re-sealing

2021-01-16; 13:02:11 EST

Member Since

2016-12-14

Posts: 257

Graham is correct. The portlites used are Beckson Fixed Port PF410-BS-20 (4"
x 10" x 2") I had to replace one (Don't use acetone to clean polycarbonate!)
and found it at Defender. Here are my notes from my Projects Report:

5.	Port Lite Re-Bedding
Port lites are a common source for cabin leaks which lead to interior damage
and headaches. There are almost as many instructions on replacing/rebedding
a port lite as there are occurrences! (“Practical Sailor Magazine” has some
great instructions online) I won’t go into the specific details of this
operation, but a couple of things I learned. My lites had been rebedded with
silicone sealer at some point. Again, there are pros and cons. One of the
cons I can attest to is the removal of silicone residue. It’s a bitch! But I
have found that Marine Formula by De-Bond Corporation will turn the residue
of just about any sealant/adhesive, including polysulfides (5200), into a
mush that can be easily removed with a putty knife, chisel or razor window
scraper.  Nonetheless, silicone sealant seems to be the best route due to
its adhesiveness, flexibility and waterproof properties. So that’s what I
used
Another thing I found out is that Acetone will ruin acrylic port lites!
Don’t use it!






-----
Joe Dempsey
s/v Respite 
Rhodes 22 1989/2005
Deltaville,VA
--
Sent from: http://rhodes-22.1065344.n5.nabble.com/
See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting