The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

Peter Nyberg



Rigging to Hoist a Burgee to the Spreader

2021-02-22; 15:47:14 EST

Member Since

2016-04-14

Posts: 711

Shawn,

It will be several months before I could post a picture, but what I’ve got is a loop clamp attached to the spreader, a block for 1/4” line attached to the loop clamp, some 3/16” line run through the block (even smaller line would be OK), and a shroud cleat attached to the aft-lower shroud at about chest height to tie the line off to.  

Keep in mind that when you’re sailing down wind, the main sail will rub against the spreader and whatever is attached to it.  You don’t want to introduce any sharp edges.  Don’t ask me how I know.

If you still want pictures, ask again in April.

Peter Nyberg
Coventry, CT
s/v Silverheels (1988/2016)

See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting