The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

Jesse Shumaker



Leak at the bow....where to look first

2021-03-09; 13:25:58 EST

Member Since

2019-06-04

Posts: 463

Rueben, you've quickly gone from a new R22 owner to helpful contributor to
the list.  Thanks for sharing.

Last fall I was rebedding some hardware on the foredeck and figured I would
see if the bow pulpit needed to be rebedded as well.  I discovered the
wiring that you mentioned as well, but the wiring on my boat had couplers
so the wires could be disconnected.  I discovered that the bolts for my bow
pulpit were encased in what appeared to be some sort of epoxy so removal
would have been a major operation and I left it in place.  I don't think I
have any leaks on the bow, but I ran a bead of 3M 4000 UV sealant around
the base of the pulpit to be on the safe side.

I've used butyl tape in some places.  I've heard that butyl that it can
further compress or ooze from under the hardware in hot weather so you may
need to snug the bolts for the pulpit again in the summer heat.

Congrats on solving the leak!

Jesse Shumaker
S/V Zephyr

See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting