The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

ROGER PIHLAJA



[Rhodes22e-list] New Traveler Modifications

2021-03-24; 18:26:16 EDT

Member Since

2002-08-01

Posts: 1438

Jeff,

The GBI 29 Traveler must be positioned in the desired location on the SS bar using the control lines.  It doesn’t just slide back and forth. The helmsman holds the hiking stick in one hand and the traveler control line in the other.  On S/V Dynamic Equilibrium, the hiking stick and the length of the standard control lines make the preferred helm gunnel position about 20-25 inches aft of the genoa sheet winches.  You could lengthen the control lines to move forward; but, then you might be in the way of the genoa sheet trimmer.  If you are single handing; then, you probably won’t be actively trimming both the genoa and the mainsail.  In this case, I would cross sheet the genoa to the windward winch, set the genoa at a conservative size and trim, and then play with the traveler and helm.  If things go crooked, you can always dump the genoa sheet!

Roger Pihlaja
S/V Dynamic Equilibrium 

Sent from my iPhone

See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting