The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

ROGER PIHLAJA



[Rhodes22e-list] New Traveler Modifications

2021-03-25; 12:35:26 EDT

Member Since

2002-08-01

Posts: 1438

Richard,

The way the traveler is used to bring the boom to the boat’s centerline is the traveler car is positioned to windward and then the mainsheet is tensioned.  On the Rhodes 22, this means there is up to 5 feet of traveler bar for the car to move to leeward if necessary.  Moving the end of the boom 5 feet to leeward is a huge amount of depowering on the mainsail.  In fact, on S/V Dynamic Equilibrium, if dumping the traveler is not enough to keep the boat on its feet in a gust, we use that as an indication of when its time to reef the mainsail.  Note, if dumping the traveler is not sufficient, you can always uncleat the mainsheet and let it run.  But, we regard this as the equivalent of having the pressure safety valve pop open on a pressure vessel.  It’s undesirable and ugly when it happens.  The GBI 29 Traveler car is positively moved from one position to another by pushing or pulling on the control line.  You never uncleat the control line and let the traveler car just slide on its own.  There are several advantages:


  1.  Because the GBI 29 Traveler control lines are one continuous loop, there is no chance of a line getting snarled or fouled like there is when using the mainsheet to depower the mainsail.
  2.  You never have to assist the boom to move because of snarls or friction in the mainsheet blocks.  Manipulate the GBI 29 Traveler control lines and the end of the boom moves right now, every time, no more and no less than you ask for.
  3.  The end of the boom does not rise up as much as when the mainsheet is used to depower the mainsail.  This means there is not as much twist introduced into the top half of the mainsail and the mainsail does not interfere with the genoa as much.
  4.  After the gust has passed, the GBI 29 Traveler can move the end of the boom back to the centerline of the boat much more quickly vs the mainsheet (~3X less line to be manipulated).  Again there is no chance of a tangle or snarl and the end of the boom is already down where it belongs so the top of the mainsail is not twisted off.

So, for all the above reasons, I strongly disagree with you, Richard.  Look in any book or video tutorial on sailing fast to windward and you will find they agree with me.  Although the details of mainsheet travelers varies from boat to boat, the proper usage of them does not change.  The GBI 29 Traveler is a unique design that I had not encountered in a lifetime of sailing.  I guess that’s why Stan got a patent on it!  Once you get used to it, it’s a marvelous piece of equipment.

Before you criticize again, I would ask you to try sailing with one hand on the tiller extension and the other on the traveler control line.  You will quickly come to appreciate the degree of fine control this gives you.  It’s the sailing equivalent of the “stick and throttle” feel that fighter pilots like so much.  If this doesn’t change your mind; then, I guess nothing will.

Roger Pihlaja
S/V Dynamic Equilibrium

Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10

From: Richard Stott<mailto:ric at stottarchitecture.com>
Sent: Thursday, March 25, 2021 9:42 AM
To: The Rhodes 22 Email List<mailto:rhodes22-list at rhodes22.org>
Subject: Re: [Rhodes22-list] [Rhodes22e-list] New Traveler Modifications

When sailing to whether, the traveler is used to bring the boom to the boat’s centerline.
This improves sail shape, the relationship of the Jib/Main and ability to point higher.
It is not the tool on a Rhodes to depower the Rig in a gust - use the main sheet for that.
Ric
Dadventure

Richard Stott, AIA, LEED AP
www.stottarchitecture.com<http://www.stottarchitecture.com>
Office  631-283-1777
Cell            516-965-3164





See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting